No item(s) available in cart.

11 BOLT HOLES WITH CORNER AND SURFACE NOTCH CALIBRATION REFERENCE STANDARD

11 BOLT HOLES WITH CORNER AND SURFACE NOTCH CALIBRATION REFERENCE STANDARD (Inch Version)

11 BOLT HOLES WITH CORNER AND SURFACE NOTCH CALIBRATION REFERENCE STANDARD (Inch Version) 11 hole Reference Standard. Contains 11 hole sizes; 7/64", 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8", 3/4" and 1.0" inch diameters.( 0.030" X 0.030" Corner EDM Notch and 3 Surface EDM Notches at .010", .020", .040" DEEP x .750" LONG.) Includes Test Report and Certificate of Conformance. DIMENSION: 6" (L) x 2.5" (W) x 0.25" (T) Holes SIZE: Ø7/64", 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8", 3/4" and 1.0" Surface Notches: Qty 3 @ 0.01", 0.02" and 0.04" deep x 0.75" long X 0.006" wide Hole Notch Configurations: • 0.03" x 0.03" (45°) corner notch @ 0.005" wide in each hole (Qty 12)

11 BOLT HOLES WITH CORNER AND SURFACE NOTCH CALIBRATION REFERENCE STANDARD (Metric Version)

11 BOLT HOLES WITH CORNER AND SURFACE NOTCH CALIBRATION REFERENCE STANDARD (Metric Version) 11 hole Reference Standard. Contains 11 hole sizes; 2.8, 3.2, 4.8, 6.35, 7.94, 9.53, 11, 12.7, 15.9, 19 and 25.4mm diameters.( 0.76mmX0.76mm Corner EDM Notch and 3 Surface EDM Notches at 0.25, 0.5 and 1mm deep x 19mm long X 0.15mm wide. Includes Test Report and Certificate of Conformance. DIMENSION: 152mm (L) x 65mm (W) x 6.35mm (T) Holes SIZE: Ø2.8, 3.2, 4.8, 6.35, 7.94, 9.53, 11, 12.7, 15.9, 19 and 25.4mm Surface Notches: Qty 3 @ 0.25, 0.5 and 1mm deep x 19mm long X 0.15mm wide Hole Notch Configurations: • 0.76mm X 0.76mm (45°) corner notch @ 0.12mm wide in each hole (Qty 12) NOTE: For special alloy request by mail.

© 2024 NDE FLAW TECH. All Right Reserved.

11 BOLT HOLES WITH CORNER AND SURFACE NOTCH CALIBRATION REFERENCE STANDARD