12 HOLES WITH CORNER AND SURFACE NOTCH CALIBRATION REFERENCE STANDARD (Metric Version) ASME SA516 Gr 70 12 HOLE REFERENCE STANDARD 1018 STEEL HOLE SIZES: Ø4mm, 4.8mm, 6.35mm, 7.93mm, 9.53mm, 11.1mm, 12.7mm, 14.3mm, 15.9mm, 17.5mm, 19mm and 25.4mm, ( 0.030 X 0.030 CORNER NOTCH and 3 SURFACE NOTCHES 0.010", 0.020", 0.040" DEEP x 0.750" LONG) DIMENSION: 152mm (L) x 63mm (W) x 6.35mm (T) Holes SIZE: Ø4mm, 4.8mm, 6.35mm, 7.93mm, 9.53mm, 11.1mm, 12.7mm, 14.3mm, 15.9mm, 17.5mm, 19mm and 25.4mm Surface Notches: Qty 3 @ 0.25, 0.5 and 1mm deep x 19mm long X 0.1mm wide Hole Notch Configurations: 0.76mm X 0.76mm (45°) corner notch @ 0.1mm wide in each hole MATERIAL: ASME SA516 Gr 70. NOTE: For special alloy request by mail.

12 HOLES WITH CORNER AND SURFACE NOTCH CALIBRATION REFERENCE STANDARD (Metric Version) ASME SA517 12 HOLE REFERENCE STANDARD 1018 STEEL HOLE SIZES: Ø4mm, 4.8mm, 6.35mm, 7.93mm, 9.53mm, 11.1mm, 12.7mm, 14.3mm, 15.9mm, 17.5mm, 19mm and 25.4mm, ( 0.030 X 0.030 CORNER NOTCH and 3 SURFACE NOTCHES 0.010", 0.020", 0.040" DEEP x 0.750" LONG) DIMENSION: 152mm (L) x 63mm (W) x 6.35mm (T) Holes SIZE: Ø4mm, 4.8mm, 6.35mm, 7.93mm, 9.53mm, 11.1mm, 12.7mm, 14.3mm, 15.9mm, 17.5mm, 19mm and 25.4mm Surface Notches: Qty 3 @ 0.25, 0.5 and 1mm deep x 19mm long X 0.1mm wide Hole Notch Configurations: 0.76mm X 0.76mm (45°) corner notch @ 0.1mm wide in each hole MATERIAL: ASME SA517. NOTE: For special alloy request by mail.

12 HOLES WITH CORNER AND SURFACE NOTCH CALIBRATION REFERENCE STANDARD (Metric Version) ASME SA36 / A36 12 HOLE REFERENCE STANDARD 1018 STEEL HOLE SIZES: Ø4mm, 4.8mm, 6.35mm, 7.93mm, 9.53mm, 11.1mm, 12.7mm, 14.3mm, 15.9mm, 17.5mm, 19mm and 25.4mm, ( 0.030 X 0.030 CORNER NOTCH and 3 SURFACE NOTCHES 0.010", 0.020", 0.040" DEEP x 0.750" LONG) DIMENSION: 152mm (L) x 63mm (W) x 6.35mm (T) Holes SIZE: Ø4mm, 4.8mm, 6.35mm, 7.93mm, 9.53mm, 11.1mm, 12.7mm, 14.3mm, 15.9mm, 17.5mm, 19mm and 25.4mm Surface Notches: Qty 3 @ 0.25, 0.5 and 1mm deep x 19mm long X 0.1mm wide Hole Notch Configurations: 0.76mm X 0.76mm (45°) corner notch @ 0.1mm wide in each hole MATERIAL: ASME SA36 / A36. NOTE: For special alloy request by mail.

12 HOLES WITH CORNER AND SURFACE NOTCH CALIBRATION REFERENCE STANDARD (Metric Version) STAINLESS STEEL 304 12 HOLE REFERENCE STANDARD 1018 STEEL HOLE SIZES: Ø4mm, 4.8mm, 6.35mm, 7.93mm, 9.53mm, 11.1mm, 12.7mm, 14.3mm, 15.9mm, 17.5mm, 19mm and 25.4mm, ( 0.030 X 0.030 CORNER NOTCH and 3 SURFACE NOTCHES 0.010", 0.020", 0.040" DEEP x 0.750" LONG) DIMENSION: 152mm (L) x 63mm (W) x 6.35mm (T) Holes SIZE: Ø4mm, 4.8mm, 6.35mm, 7.93mm, 9.53mm, 11.1mm, 12.7mm, 14.3mm, 15.9mm, 17.5mm, 19mm and 25.4mm Surface Notches: Qty 3 @ 0.25, 0.5 and 1mm deep x 19mm long X 0.1mm wide Hole Notch Configurations: 0.76mm X 0.76mm (45°) corner notch @ 0.1mm wide in each hole MATERIAL: STAINLESS STEEL 304. NOTE: For special alloy request by mail.

12 HOLES WITH CORNER AND SURFACE NOTCH CALIBRATION REFERENCE STANDARD (Metric Version) STAINLESS STEEL 316 12 HOLE REFERENCE STANDARD 1018 STEEL HOLE SIZES: Ø4mm, 4.8mm, 6.35mm, 7.93mm, 9.53mm, 11.1mm, 12.7mm, 14.3mm, 15.9mm, 17.5mm, 19mm and 25.4mm, ( 0.030 X 0.030 CORNER NOTCH and 3 SURFACE NOTCHES 0.010", 0.020", 0.040" DEEP x 0.750" LONG) DIMENSION: 152mm (L) x 63mm (W) x 6.35mm (T) Holes SIZE: Ø4mm, 4.8mm, 6.35mm, 7.93mm, 9.53mm, 11.1mm, 12.7mm, 14.3mm, 15.9mm, 17.5mm, 19mm and 25.4mm Surface Notches: Qty 3 @ 0.25, 0.5 and 1mm deep x 19mm long X 0.1mm wide Hole Notch Configurations: 0.76mm X 0.76mm (45°) corner notch @ 0.1mm wide in each hole MATERIAL: STAINLESS STEEL 316. NOTE: For special alloy request by mail.

12 HOLES WITH CORNER AND SURFACE NOTCH CALIBRATION REFERENCE STANDARD (Metric Version) TITANIUM 12 HOLE REFERENCE STANDARD 1018 STEEL HOLE SIZES: Ø4mm, 4.8mm, 6.35mm, 7.93mm, 9.53mm, 11.1mm, 12.7mm, 14.3mm, 15.9mm, 17.5mm, 19mm and 25.4mm, ( 0.030 X 0.030 CORNER NOTCH and 3 SURFACE NOTCHES 0.010", 0.020", 0.040" DEEP x 0.750" LONG) DIMENSION: 152mm (L) x 63mm (W) x 6.35mm (T) Holes SIZE: Ø4mm, 4.8mm, 6.35mm, 7.93mm, 9.53mm, 11.1mm, 12.7mm, 14.3mm, 15.9mm, 17.5mm, 19mm and 25.4mm Surface Notches: Qty 3 @ 0.25, 0.5 and 1mm deep x 19mm long X 0.1mm wide Hole Notch Configurations: 0.76mm X 0.76mm (45°) corner notch @ 0.1mm wide in each hole MATERIAL: TITANIUM. NOTE: For special alloy request by mail.

12 HOLES WITH CORNER AND SURFACE NOTCH CALIBRATION REFERENCE STANDARD (Metric Version) ALUMINUM 12 HOLE REFERENCE STANDARD 1018 STEEL HOLE SIZES: Ø4mm, 4.8mm, 6.35mm, 7.93mm, 9.53mm, 11.1mm, 12.7mm, 14.3mm, 15.9mm, 17.5mm, 19mm and 25.4mm, ( 0.030 X 0.030 CORNER NOTCH and 3 SURFACE NOTCHES 0.010", 0.020", 0.040" DEEP x 0.750" LONG) DIMENSION: 152mm (L) x 63mm (W) x 6.35mm (T) Holes SIZE: Ø4mm, 4.8mm, 6.35mm, 7.93mm, 9.53mm, 11.1mm, 12.7mm, 14.3mm, 15.9mm, 17.5mm, 19mm and 25.4mm Surface Notches: Qty 3 @ 0.25, 0.5 and 1mm deep x 19mm long X 0.1mm wide Hole Notch Configurations: 0.76mm X 0.76mm (45°) corner notch @ 0.1mm wide in each hole MATERIAL: ALUMINUM. NOTE: For special alloy request by mail.

12 HOLES WITH CORNER AND SURFACE NOTCH CALIBRATION REFERENCE STANDARD (Metric Version) COPPER 12 HOLE REFERENCE STANDARD 1018 STEEL HOLE SIZES: Ø4mm, 4.8mm, 6.35mm, 7.93mm, 9.53mm, 11.1mm, 12.7mm, 14.3mm, 15.9mm, 17.5mm, 19mm and 25.4mm, ( 0.030 X 0.030 CORNER NOTCH and 3 SURFACE NOTCHES 0.010", 0.020", 0.040" DEEP x 0.750" LONG) DIMENSION: 152mm (L) x 63mm (W) x 6.35mm (T) Holes SIZE: Ø4mm, 4.8mm, 6.35mm, 7.93mm, 9.53mm, 11.1mm, 12.7mm, 14.3mm, 15.9mm, 17.5mm, 19mm and 25.4mm Surface Notches: Qty 3 @ 0.25, 0.5 and 1mm deep x 19mm long X 0.1mm wide Hole Notch Configurations: 0.76mm X 0.76mm (45°) corner notch @ 0.1mm wide in each hole MATERIAL: COPPER. NOTE: For special alloy request by mail.

12 HOLES WITH CORNER AND SURFACE NOTCH CALIBRATION REFERENCE STANDARD (Metric Version) INCONEL 625 12 HOLE REFERENCE STANDARD 1018 STEEL HOLE SIZES: Ø4mm, 4.8mm, 6.35mm, 7.93mm, 9.53mm, 11.1mm, 12.7mm, 14.3mm, 15.9mm, 17.5mm, 19mm and 25.4mm, ( 0.030 X 0.030 CORNER NOTCH and 3 SURFACE NOTCHES 0.010", 0.020", 0.040" DEEP x 0.750" LONG) DIMENSION: 152mm (L) x 63mm (W) x 6.35mm (T) Holes SIZE: Ø4mm, 4.8mm, 6.35mm, 7.93mm, 9.53mm, 11.1mm, 12.7mm, 14.3mm, 15.9mm, 17.5mm, 19mm and 25.4mm Surface Notches: Qty 3 @ 0.25, 0.5 and 1mm deep x 19mm long X 0.1mm wide Hole Notch Configurations: 0.76mm X 0.76mm (45°) corner notch @ 0.1mm wide in each hole MATERIAL: INCONEL 625. NOTE: For special alloy request by mail.

12 HOLES WITH CORNER AND SURFACE NOTCH CALIBRATION REFERENCE STANDARD (Metric Version) INCONEL 825 12 HOLE REFERENCE STANDARD 1018 STEEL HOLE SIZES: Ø4mm, 4.8mm, 6.35mm, 7.93mm, 9.53mm, 11.1mm, 12.7mm, 14.3mm, 15.9mm, 17.5mm, 19mm and 25.4mm, ( 0.030 X 0.030 CORNER NOTCH and 3 SURFACE NOTCHES 0.010", 0.020", 0.040" DEEP x 0.750" LONG) DIMENSION: 152mm (L) x 63mm (W) x 6.35mm (T) Holes SIZE: Ø4mm, 4.8mm, 6.35mm, 7.93mm, 9.53mm, 11.1mm, 12.7mm, 14.3mm, 15.9mm, 17.5mm, 19mm and 25.4mm Surface Notches: Qty 3 @ 0.25, 0.5 and 1mm deep x 19mm long X 0.1mm wide Hole Notch Configurations: 0.76mm X 0.76mm (45°) corner notch @ 0.1mm wide in each hole MATERIAL: INCONEL 825. NOTE: For special alloy request by mail.

12 HOLES WITH CORNER AND SURFACE NOTCH CALIBRATION REFERENCE STANDARD (Metric Version) MONAL 800 12 HOLE REFERENCE STANDARD 1018 STEEL HOLE SIZES: Ø4mm, 4.8mm, 6.35mm, 7.93mm, 9.53mm, 11.1mm, 12.7mm, 14.3mm, 15.9mm, 17.5mm, 19mm and 25.4mm, ( 0.030 X 0.030 CORNER NOTCH and 3 SURFACE NOTCHES 0.010", 0.020", 0.040" DEEP x 0.750" LONG) DIMENSION: 152mm (L) x 63mm (W) x 6.35mm (T) Holes SIZE: Ø4mm, 4.8mm, 6.35mm, 7.93mm, 9.53mm, 11.1mm, 12.7mm, 14.3mm, 15.9mm, 17.5mm, 19mm and 25.4mm Surface Notches: Qty 3 @ 0.25, 0.5 and 1mm deep x 19mm long X 0.1mm wide Hole Notch Configurations: 0.76mm X 0.76mm (45°) corner notch @ 0.1mm wide in each hole MATERIAL: MONAL 800. NOTE: For special alloy request by mail.

12 HOLES WITH CORNER AND SURFACE NOTCH CALIBRATION REFERENCE STANDARD (Metric Version) MAGNESIUM 12 HOLE REFERENCE STANDARD 1018 STEEL HOLE SIZES: Ø4mm, 4.8mm, 6.35mm, 7.93mm, 9.53mm, 11.1mm, 12.7mm, 14.3mm, 15.9mm, 17.5mm, 19mm and 25.4mm, ( 0.030 X 0.030 CORNER NOTCH and 3 SURFACE NOTCHES 0.010", 0.020", 0.040" DEEP x 0.750" LONG) DIMENSION: 152mm (L) x 63mm (W) x 6.35mm (T) Holes SIZE: Ø4mm, 4.8mm, 6.35mm, 7.93mm, 9.53mm, 11.1mm, 12.7mm, 14.3mm, 15.9mm, 17.5mm, 19mm and 25.4mm Surface Notches: Qty 3 @ 0.25, 0.5 and 1mm deep x 19mm long X 0.1mm wide Hole Notch Configurations: 0.76mm X 0.76mm (45°) corner notch @ 0.1mm wide in each hole MATERIAL: MAGNESIUM. NOTE: For special alloy request by mail.

12 HOLES WITH CORNER AND SURFACE NOTCH CALIBRATION REFERENCE STANDARD (Metric Version) NICKEL 12 HOLE REFERENCE STANDARD 1018 STEEL HOLE SIZES: Ø4mm, 4.8mm, 6.35mm, 7.93mm, 9.53mm, 11.1mm, 12.7mm, 14.3mm, 15.9mm, 17.5mm, 19mm and 25.4mm, ( 0.030 X 0.030 CORNER NOTCH and 3 SURFACE NOTCHES 0.010", 0.020", 0.040" DEEP x 0.750" LONG) DIMENSION: 152mm (L) x 63mm (W) x 6.35mm (T) Holes SIZE: Ø4mm, 4.8mm, 6.35mm, 7.93mm, 9.53mm, 11.1mm, 12.7mm, 14.3mm, 15.9mm, 17.5mm, 19mm and 25.4mm Surface Notches: Qty 3 @ 0.25, 0.5 and 1mm deep x 19mm long X 0.1mm wide Hole Notch Configurations: 0.76mm X 0.76mm (45°) corner notch @ 0.1mm wide in each hole MATERIAL: NICKEL. NOTE: For special alloy request by mail.