AIRBUS MULTI HOLE REFERENCE STANDARD

AIRBUS MULTI HOLE REFERENCE STANDARD (Inch Version)

AIRBUS MULTI HOLE REFERENCE STANDARD (Inch Version) AIRBUS MULTI HOLE REFERENCE STANDARD A-318- A321 51-63-04 PART 6 FIGURE 601, PAGE 601/602. Includes Test Report and Certificate of Conformance. OVERALL DIMENSION – 11" (L) X 4" (W) X 0.2" (T) CONTAIN 72 HOLES AND 36 CORNER NOTCH, 18 THRU NOTCH HOLE DIA - Ø0.5", 0.47", 0.45", 0.44", 0.41", 0.39", 0.37", 0.34", 0.33", 0.31", 0.28", 0.26", 0.25", 0.22", 0.20", 0.19", 0.16", 0.14". (18) CORNER NOTCH – 0.04" (D) X 0.04" (L) (18) CORNER NOTCH - 0.008" (D) X 0.008" (L) (18) BORE NOTCH - 0.02" (D) ALL NOTCHS WIDTH - 0.006" STANDARD/MANUFACTURE REFERENCE/PART NUMBER: 99A53003001100

AIRBUS MULTI HOLE REFERENCE STANDARD (Metric Version)

AIRBUS MULTI HOLE REFERENCE STANDARD (Metric Version) AIRBUS MULTI HOLE REFERENCE STANDARD A-318- A321 51-63-04 PART 6 FIGURE 601, PAGE 601/602. Includes Test Report and Certificate of Conformance. OVERALL DIMENSION - 280mm (L) X 100mm (W) X 5mm (T) CONTAIN 72 HOLES AND 36 CORNER NOTCH, 18 THRU NOTCH HOLE DIA - Ø12.7, 11.9, 11.5, 11.1, 10.3, 9.9, 9.5, 8.7, 8.3, 7.9, 7.1, 6.7, 6.4, 5.7, 5.2, 4.8, 4, 3.6mm (18) CORNER NOTCH - 1mm (D) X 1mm (L) (18) CORNER NOTCH - 0.2mm (D) X 0.2mm (L) (18) BORE NOTCH - 0.5mm (D) ALL NOTCHS WIDTH - 0.15mm STANDARD/MANUFACTURE REFERENCE/PART NUMBER: 99A53003001100

12 BOLT HOLES WITH CORNER NOTCH REFERENCE STANDARD
- 12 BOLT HOLES WITH CORNER NOTCH REFERENCE STANDARD (Inch Version)
- 12 BOLT HOLES WITH CORNER NOTCH REFERENCE STANDARD (Metric Version)
4 HOLES REFERENCE STANDARD
- 4 HOLES REFERENCE STANDARD (Inch Version)
- 4 HOLES REFERENCE STANDARD (Metric Version)
Custom 2 Bolt Hole Calibration Block
- Custom 2 Bolt Hole Calibration Block (Inch Version)
- Custom 2 Bolt Hole Calibration Block (Metric Version)
Custom TWO Bolt Hole Calibration Block
- Custom TWO Bolt Hole Calibration Block (Inch Version)
- Custom TWO Bolt Hole Calibration Block (Metric Version)
Custom TWO Bolt Hole With ONE Flaw Calibration Block
- Custom TWO Bolt Hole With ONE Flaw Calibration Block (Inch Version)
- Custom TWO Bolt Hole With ONE Flaw Calibration Block (Metric Version)
Custom 2 Bolt Hole with 1 Flaw Reference Block
- Custom 2 Bolt Hole with 1 Flaw Reference Block (Inch Version)
- Custom 2 Bolt Hole with 1 Flaw Reference Block (Metric Version)
Custom Bolt Hole Block
- Custom Bolt Hole Block (Inch Version)
- Custom Bolt Hole Block (Metric Version)
Custom 2 Bolt Hole Block
- Custom 2 Bolt Hole Block (Inch Version)
- Custom 2 Bolt Hole Block (Metric Version)
3 HOLE REFERENCE STANDARD BLOCK
- 3 HOLE REFERENCE STANDARD BLOCK (Inch Version)
- 3 HOLE REFERENCE STANDARD BLOCK (Metric Version)
5 HOLE REFERENCE STANDARD
- 5 HOLE REFERENCE STANDARD (Inch Version)
- 5 HOLE REFERENCE STANDARD (Metric Version)
12 HOLES REFERENCE STANDARD
- 12 HOLES REFERENCE STANDARD (Inch Version)
- 12 HOLES REFERENCE STANDARD (Metric Version)
12 HOLES WITH CORNER NOTCH REFERENCE STANDARD
- 12 HOLES WITH CORNER NOTCH REFERENCE STANDARD (Inch Version)
- 12 HOLES WITH CORNER NOTCH REFERENCE STANDARD (Metric Version)
12 HOLES WITH CORNER AND SURFACE NOTCH REFERENCE STANDARD
- 12 HOLES WITH CORNER AND SURFACE NOTCH REFERENCE STANDARD (Inch Version)
- 12 HOLES WITH CORNER AND SURFACE NOTCH REFERENCE STANDARD (Metric Version)
12 HOLES WITH CORNER AND SURFACE NOTCH CALIBRATION REFERENCE STANDARD
- 12 HOLES WITH CORNER AND SURFACE NOTCH CALIBRATION REFERENCE STANDARD (Inch Version)
- 12 HOLES WITH CORNER AND SURFACE NOTCH CALIBRATION REFERENCE STANDARD (Metric Version)
12 BOLT HOLES WITH CORNER AND SURFACE NOTCH REFERENCE STANDARD
- 12 BOLT HOLES WITH CORNER AND SURFACE NOTCH REFERENCE STANDARD (Inch Version)
- 12 BOLT HOLES WITH CORNER AND SURFACE NOTCH REFERENCE STANDARD (Metric Version)
12 BOLT HOLES REFERENCE STANDARD
- 12 BOLT HOLES REFERENCE STANDARD (Inch Version)
- 12 BOLT HOLES REFERENCE STANDARD (Metric Version)
Custom 4 Holes Calibration Standard
- Custom 4 Holes Calibration Standard (Inch Version)
- Custom 4 Holes Calibration Standard (Metric Version)
12 BOLT HOLES WITH CORNER AND MID WALL NOTCH REFERENCE STANDARD
- 12 BOLT HOLES WITH CORNER AND MID WALL NOTCH REFERENCE STANDARD (Inch Version)
- 12 BOLT HOLES WITH CORNER AND MID WALL NOTCH REFERENCE STANDARD (Metric Version)
11 BOLT HOLES WITH CORNER AND SURFACE NOTCH CALIBRATION REFERENCE STANDARD
- 11 BOLT HOLES WITH CORNER AND SURFACE NOTCH CALIBRATION REFERENCE STANDARD (Inch Version)
- 11 BOLT HOLES WITH CORNER AND SURFACE NOTCH CALIBRATION REFERENCE STANDARD (Metric Version)
12 BOLT HOLES WITH 2 CORNER NOTCH REFERENCE STANDARD
- 12 BOLT HOLES WITH 2 CORNER NOTCH REFERENCE STANDARD (Inch Version)
- 12 BOLT HOLES WITH 2 CORNER NOTCH REFERENCE STANDARD (Metric Version)
12 BOLT HOLES WITH 2 CORNER AND 4 SURFACE NOTCH REFERENCE STANDARD
- 12 BOLT HOLES WITH 2 CORNER AND 4 SURFACE NOTCH REFERENCE STANDARD (Inch Version)
- 12 BOLT HOLES WITH 2 CORNER AND 4 SURFACE NOTCH REFERENCE STANDARD (Metric Version)
CUSTOM McDONNELL DOUGLAS 12 BOLT HOLES REFERENCE STANDARD
- CUSTOM McDONNELL DOUGLAS 12 BOLT HOLES REFERENCE STANDARD (Inch Version)
- CUSTOM McDONNELL DOUGLAS 12 BOLT HOLES REFERENCE STANDARD (Metric Version)
CUSTOM McDONNELL DOUGLAS 12 BOLT HOLES WITH CORNER AND MID WALL NOTCH REFERENCE STANDARD
- CUSTOM McDONNELL DOUGLAS 12 BOLT HOLES WITH CORNER AND MID WALL NOTCH REFERENCE STANDARD (Inch Version)
- CUSTOM McDONNELL DOUGLAS 12 BOLT HOLES WITH CORNER AND MID WALL NOTCH REFERENCE STANDARD (Metric Version)
10 HOLES WITH 1 CORNER AND 3 SURFACE NOTCH REFERENCE STANDARD
- 10 HOLES WITH 1 CORNER AND 3 SURFACE NOTCH REFERENCE STANDARD (Inch Version)
- 10 HOLES WITH 1 CORNER AND 3 SURFACE NOTCH REFERENCE STANDARD (Metric Version)
14 BOLT HOLES 2 CORNER AND 1 SURFACE NOTCH REFERENCE STANDARD
- 14 BOLT HOLES 2 CORNER AND 1 SURFACE NOTCH REFERENCE STANDARD (Inch Version)
- 14 BOLT HOLES 2 CORNER AND 1 SURFACE NOTCH REFERENCE STANDARD (Metric Version)
11 BOLT HOLES WITH 2 CORNER NOTCH CALIBRATION REFERENCE STANDARD
- 11 BOLT HOLES WITH 2 CORNER NOTCH CALIBRATION REFERENCE STANDARD (Inch Version)
- 11 BOLT HOLES WITH 2 CORNER NOTCH CALIBRATION REFERENCE STANDARD (Metric Version)
7 HOLES WITH 14 CORNER NOTCH REFERENCE STANDARD
- 7 HOLES WITH 14 CORNER NOTCH REFERENCE STANDARD (Inch Version)
- 7 HOLES WITH 14 CORNER NOTCH REFERENCE STANDARD (Metric Version)
11 HOLES WITH 11 CORNER NOTCH REFERENCE STANDARD
- 11 HOLES WITH 11 CORNER NOTCH REFERENCE STANDARD (Inch Version)
- 11 HOLES WITH 11 CORNER NOTCH REFERENCE STANDARD (Metric Version)
14 HOLES WITH 14 CORNER NOTCH REFERENCE STANDARD
- 14 HOLES WITH 14 CORNER NOTCH REFERENCE STANDARD (Inch Version)
- 14 HOLES WITH 14 CORNER NOTCH REFERENCE STANDARD (Metric Version)
Custom Bolt Hole Calibration Block
- Custom Bolt Hole Calibration Block (Inch Version)
- Custom Bolt Hole Reference Block (Metric Version)
Custom 2 (0.63") Bolt Hole With 1 Flaw Reference Block
- Custom 2 (0.63") Bolt Hole With 1 Flaw Reference Block (Inch Version)
- Custom 2 (16.0mm) Bolt Hole With 1 Flaw Reference Block (Metric Version)
TEN STEP WEDGE BLOCK
- TEN STEP WEDGE BLOCK (INCH VERSION)
- TEN STEP WEDGE BLOCK (METRIC VERSION)
EDDY CURRENT SURFACE REFERENCE STANDARD BLOCK
- EDDY CURRENT SURFACE REFERENCE STANDARD BLOCK (Inch Version)
- EDDY CURRENT SURFACE REFERENCE STANDARD BLOCK (Metric Version)
CUSTOM SURFACE CALIBRATION BLOCK
- CUSTOM SURFACE CALIBRATION BLOCK (Inch Version)
- CUSTOM SURFACE CALIBRATION BLOCK (Metric Version)
EDDY CURRENT SURFACE STANDARD BLOCK
- EDDY CURRENT SURFACE STANDARD BLOCK (Inch Version)
- EDDY CURRENT SURFACE STANDARD BLOCK (Metric Version)
EDDY CURRENT 4 NOTCH BLOCK
- EDDY CURRENT 4 NOTCH BLOCK (Inch Version)
- EDDY CURRENT 4 NOTCH BLOCK (Metric Version)
EDDY CURRENT 3 NOTCH BLOCK
- EDDY CURRENT 3 NOTCH BLOCK (Inch Version)
- EDDY CURRENT 3 NOTCH BLOCK (Metric Version)
EDDY CURRENT 5 NOTCH BLOCK
- EDDY CURRENT 5 NOTCH BLOCK (Inch Version)
- EDDY CURRENT 5 NOTCH BLOCK (Metric Version)
FOUR STEP WEDGE BLOCK
- FOUR STEP WEDGE BLOCK (INCH VERSION)
- FOUR STEP WEDGE BLOCK (METRIC VERSION)
FIVE STEP WEDGE BLOCK
- FIVE STEP WEDGE BLOCK (INCH VERSION)
- FIVE STEP WEDGE BLOCK (METRIC VERSION)
SURFACE EDM REFERENCE STANDARD BLOCK
- SURFACE EDM REFERENCE STANDARD BLOCK (Inch Version)
- SURFACE EDM REFERENCE STANDARD BLOCK (Metric Version)
AIRBUS TAP TEST TOOL
- AIRBUS TAP TEST TOOL-99D57204183000 (Inch Version)
- AIRBUS TAP TEST TOOL-99D57204183000 (Metric Version)
TWO STEP WEDGE BLOCK
- TWO STEP WEDGE BLOCK (INCH VERSION)
- TWO STEP WEDGE BLOCK (METRIC VERSION)
SIX STEP WEDGE BLOCK
- SIX STEP WEDGE BLOCK (INCH VERSION)
- SIX STEP WEDGE BLOCK (METRIC VERSION)
3 STEP WEDGE BLOCK
- 3 STEP WEDGE BLOCK (INCH VERSION)
- 3 STEP THIN WEDGE BLOCK (METRIC VERSION)
SEVEN STEP WEDGE BLOCK
- SEVEN STEP WEDGE BLOCK (INCH VERSION)
- SEVEN STEP WEDGE BLOCK (METRIC VERSION)
SURFACE STANDARD BLOCK
- SURFACE STANDARD BLOCK (Inch Version)
- SURFACE STANDARD BLOCK (Metric Version)
EIGHT STEP WEDGE BLOCK
- EIGHT STEP WEDGE BLOCK (INCH VERSION)
- EIGHT STEP WEDGE BLOCK (METRIC VERSION)
AIRBUS CALIBRATION BLOCK
- AIRBUS CALIBRATION BLOCK-2-835-01-9301(Inch Version)
- AIRBUS CALIBRATION BLOCK-2-835-01-9301 (Metric Version)
AIRBUS MULTIDIRECTIONAL BLOCK SET
- AIRBUS MULTIDIRECTIONAL BLOCK SET INCH VERSION
- AIRBUS MULTIDIRECTIONAL BLOCK SET METRIC VERSION
AIRBUS REFERENCE STANDARD
- AIRBUS REFERENCE STANDARD INCH VERSION
- AIRBUS REFERENCE STANDARD METRIC VERSION
ATR REFERENCE STANDARD
- ATR REFERENCE STANDARD (Inch Version)
- ATR REFERENCE STANDARD (Metric Version)
CORROSION TEST PLATE
- CORROSION TEST PLATE (Inch Version)
- CORROSION TEST PLATE (Metric Version)
AIRBUS CALIBRATION BLOCK SET
- AIRBUS CALIBRATION BLOCK SET (Inch Version)
- AIRBUS CALIBRATION BLOCK SET (Metric Version)
AIRBUS MULTI HOLE REFERENCE STANDARD
- AIRBUS MULTI HOLE REFERENCE STANDARD (Inch Version)
- AIRBUS MULTI HOLE REFERENCE STANDARD (Metric Version)
SPLITTED CONICAL CALIBRATION STANDARD
- SPLITTED CONICAL CALIBRATION STANDARD (Inch Version)
- SPLITTED CONICAL CALIBRATION STANDARD (Metric Version)
BOEING REFERENCE STANDARD
- BOEING REFERENCE STANDARD (Inch Version)
- BOEING REFERENCE STANDARD (Metric Version)
AIRCRAFT BRAKING SYSTEMS REFERENCE STANDARD
- AIRCRAFT BRAKING SYSTEMS REFERENCE STANDARD (Inch Version)
- AIRCRAFT BRAKING SYSTEMS REFERENCE STANDARD (Metric Version)
WHEEL REFERENCE STANDARD
- WHEEL REFERENCE STANDARD (Inch Version)
- WHEEL REFERENCE STANDARD (Metric Version)
EDM REFERENCE STANDARD
- EDM REFERENCE STANDARD (Inch Version)
- EDM REFERENCE STANDARD (Metric Version)
3 HOLE REFERENCE STANDARD
- 3 HOLE REFERENCE STANDARD (Inch Version)
- 3 HOLE REFERENCE STANDARD (Metric Version)