No item(s) available in cart.

AWS UT KIT

AWS UT KIT (Inch Version)

AWS UT KIT (Inch Version) Based on AWS D1.8 Annex E For Structural Welds AWS Seismic Supplement for UT Testing Qty: 1 Set of 8 specimens • Material: A36 or 1018 carbon steel • Specifications: Total of 8 Welded Specimens: • 2 Butt Welds w/ V Groove (1) at 0.375” (T) and (1) at 0.75” (T) X 6” (L) X 12” (W) • 2 Butt Welds w/ V Groove w/ Backing Bar, (1) at 0.375” (T) and (1) at 0.75” (T) X 6” (L) X 12″ (W) • 2 Tee Welds w/ Single Groove, (1) at 0.375” (T) & (1) at 0.75” (T) X 6” (L) X 6” Main X 7” (Branch) • 2 Tee Welds w/ Single Groove w/ Backing Bar, (1) at 0.375” (T) and (1) at 0.75” (T) X 6” (L) X 6” Main X 7” Branch • Flaws: Total of 20 (~2 – 3 per specimen) sub-surface and surface breaking flaws randomly placed throughout the volume of the weld. The flaw sizes will vary from approximately +1” to -0.5” in length and +/- 0.25” in height. • Tolerance: +/- 0.080” • Weld Condition: Surface condition of the crown and root will be “as welded.” • Documentation: Certificate of Conformance, “As Built” CAD, RT Inspection Film and Technique Sheet, UT Inspection Report and Measuring and Test Equipment Certificates

AWS UT KIT (Metric Version)

AWS UT KIT (Metric Version) Based on AWS D1.8 Annex E for Structural Welds AWS Seismic Supplement for UT Testing Qty: 1 Set of 8 specimens • Material: A36 or 1018 carbon steel • Specifications: Total of 8 Welded Specimens: • 2 Butt Welds w/ V Groove (1) at 9.5mm (T) and (1) 19mm (T) X 150mm (L) X 300mm (W) • 2 Butt Welds w/ V Groove w/ Backing Bar, (1) at 9.5mm (T) and (1)19mm(T) X 150mm (L) X 300mm (W) • 2 Tee Welds w/ Single Groove, (1) 9.5mm (T) & (1) 19mm (T) X 150mm (L) X 150mm Main X 170mm (Branch) • 2 Tee Welds w/ Single Groove w/ Backing Bar, (1) 9.5mm (T) and (1) 19mm (T) X 150mm (L) X 150mm Main X 170mm Branch • Flaws: Total of 20 (~2 – 3 per specimen) sub-surface and surface breaking flaws randomly placed throughout the volume of the weld. The flaw sizes will vary from approximately +25mm to -12.5mm in length and +/- 6mm in height. • Tolerance: +/- 2mm • Weld Condition: Surface condition of the crown and root will be “as welded.” • Documentation: Certificate of Conformance, “As Built” CAD, RT Inspection Film and Technique Sheet, UT Inspection Report and Measuring and Test Equipment Certificates

© 2024 NDE FLAW TECH. All Right Reserved.

AWS UT KIT