Plate No Weld (3 flaws, vertical, horizontal and angled) 6mm Metric Version Carbon Steel Plate Eddy Current Test Practical Exam Flaw Specimen Plate Eddy Current Test Practical Exam flawed Test specimens. Geometry: 6mm (T) x 100mm (W) x 300mm (L). Flaws: 3, randomly placed Standard Tolerance: +/-4mm. Documentation: NDT Verification Reports, C of C, CAD Drawings and Test Sheets. Material: Carbon Steel. Customized Calibration Test Block and Flaw Specimen also available.

Plate No Weld Plate Eddy Current Test Practical Exam Flaw Specimen Plate Eddy Current Test Practical Exam flawed Test specimens. Specifications: No weld, Base material only Geometry: 6mm (T) x 100mm (W) x 300mm (L). Flaws: 3, randomly placed Standard Tolerance: +/-4mm. Documentation: NDT Verification Reports, C of C, CAD Drawings and Test Sheets. Material: Carbon Steel. Customized Calibration Test Block and Flaw Specimen also available.

Plate Eddy Current Test Practical Exam Flaw Specimen 6 mm SINGLE-V Bevel (Metric Version) Carbon Steel Plate Eddy Current Test Practical Exam Flaw Specimen Plate Eddy Current Test Practical Exam flawed Test specimens. Geometry: 6mm (T) x 100mm (W) x 300mm (L). Flaws: 3, randomly placed Standard Tolerance: +/-4mm. Documentation: NDT Verification Reports, C of C, CAD Drawings and Test Sheets. Material: Carbon Steel. Customized Calibration Test Block and Flaw Specimen also available.

Plate Eddy Current Test Practical Exam Flaw Specimen 6 mm SINGLE-V (Metric Version) Carbon Steel Plate Eddy Current Test Practical Exam Flaw Specimen Plate Eddy Current Test Practical Exam flawed Test specimens. Geometry: 6mm (T) x 100mm (W) x 300mm (L). Flaws: 3, randomly placed Standard Tolerance: +/-4mm. Documentation: NDT Verification Reports, C of C, CAD Drawings and Test Sheets. Material: Carbon Steel. Customized Calibration Test Block and Flaw Specimen also available.

Plate w/ SV (4 EDM Elliptical Notches) Plate Eddy Current Test Practical Exam Flaw Specimen Plate Eddy Current Test Practical Exam flawed Test specimens. Geometry: 6mm (T) x 100mm (W) x 300mm (L). Flaws: 4 EDM Elliptical Notches each (Randomly selected and placed) 3, randomly placed Standard Tolerance: +/-4mm. Documentation: NDT Verification Reports, C of C, CAD Drawings and Test Sheets. Material: Carbon Steel. Customized Calibration Test Block and Flaw Specimen also available.

Plate w/ Crown only Plate Eddy Current Test Practical Exam Flaw Specimen Plate Eddy Current Test Practical Exam flawed Test specimens. Geometry: 6mm (T) x 100mm (W) x 300mm (L). Flaws: 3, randomly placed Standard Tolerance: +/-4mm. Documentation: NDT Verification Reports, C of C, CAD Drawings and Test Sheets. Material: Carbon Steel. Customized Calibration Test Block and Flaw Specimen also available.

Plate Eddy Current Test Practical Exam Flaw Specimen 18 mm DOUBLE-V (Metric Version) Carbon Steel Plate Eddy Current Test Practical Exam Flaw Specimen Plate Eddy Current Test Practical Exam flawed Test specimens. Geometry: 18mm (T) x 300mm (W) x 300mm (L). Flaws: 3, randomly placed Standard Tolerance: +/-4mm. Documentation: NDT Verification Reports, C of C, CAD Drawings and Test Sheets. Material: Carbon Steel. Customized Calibration Test Block and Flaw Specimen also available.

Pipe SINGLE-V 120° Segment Eddy Current Test Practical Exam Flaw Specimen Ø300mm (Metric Version) Carbon Steel Pipe SV Eddy Current Test Practical Exam Flaw Specimen Pipe Eddy Current Test Practical Exam flawed Test specimens. Geometry: Sch40 (10mm) (T) x Ø300mm x 300mm (L). Flaws: 3, randomly placed Standard Tolerance: +/-4mm. Documentation: NDT Verification Reports, C of C, CAD Drawings and Test Sheets. Material: Carbon Steel. Customized Calibration Test Block and Flaw Specimen also available.

Pipe w/ Crown only Pipe Eddy Current Test Practical Exam Flaw Specimen Pipe Eddy Current Test Practical Exam flawed Test specimens. Geometry: Sch80 (8.6mm) (T) x Ø100mm x 300mm (L). Flaws: 3, randomly placed Standard Tolerance: +/-4mm. Documentation: NDT Verification Reports, C of C, CAD Drawings and Test Sheets. Material: Carbon Steel. Customized Calibration Test Block and Flaw Specimen also available.

Pipe w/ SV Pipe Eddy Current Test Practical Exam Flaw Specimen Pipe Eddy Current Test Practical Exam flawed Test specimens. Geometry: Sch80 (8.6mm) (T) x Ø100mm x 300mm (L). Flaws: 3, randomly placed Standard Tolerance: +/-4mm. Documentation: NDT Verification Reports, C of C, CAD Drawings and Test Sheets. Material: Carbon Steel. Customized Calibration Test Block and Flaw Specimen also available.

T-Plate Eddy Current Test Practical Exam Flaw Specimen 6mm SINGLE-V (Metric Version) T-Plate Eddy Current Test Practical Exam Flaw Specimen T-Plate Eddy Current Test Practical Exam flawed Test specimens. Geometry: 6mm (T) x 100mm (W) x 100mm (H) x 300mm (L). Flaws: 3, randomly placed Standard Tolerance: +/-4mm. Documentation: NDT Verification Reports, C of C, CAD Drawings and Test Sheets. Material: Carbon Steel. Customized Calibration Test Block and Flaw Specimen also available.

Tee w/ Fillet Welds T-Plate Eddy Current Test Practical Exam Flaw Specimen T-Plate Eddy Current Test Practical Exam flawed Test specimens. Geometry: 6mm (T) x 100mm (W) x 100mm (H) x 300mm (L). Flaws: 3, randomly placed Standard Tolerance: +/-4mm. Documentation: NDT Verification Reports, C of C, CAD Drawings and Test Sheets. Material: Carbon Steel. Customized Calibration Test Block and Flaw Specimen also available.

Corner Butt Joint w/ Gusset Weld Geometry: 6mm (T) x 100mm (B) x 150mm (M) x 300mm (W) w/ ~3″ Center Inside Gusset Flaws: 3, randomly placed Standard Tolerance: +/-4mm. Documentation: NDT Verification Reports, C of C, CAD Drawings and Test Sheets. Material: Carbon Steel. Customized Calibration Test Block and Flaw Specimen also available.

Cruciform w/ Fillet to Branch to Main Geometry: 12.7mm (T) x 100mm (B) x 200mm (M) x 100mm (B) x 300mm (W) Flaws: 3, randomly placed Standard Tolerance: +/-4mm. Documentation: NDT Verification Reports, C of C, CAD Drawings and Test Sheets. Material: Carbon Steel. Customized Calibration Test Block and Flaw Specimen also available.

Pad Eye w/ Fillet Geometry: 12.7mm (T) x 100mm (B) x 200mm (M) x 300mm (W) Flaws: 3, randomly placed Standard Tolerance: +/-4mm. Documentation: NDT Verification Reports, C of C, CAD Drawings and Test Sheets. Material: Carbon Steel. Customized Calibration Test Block and Flaw Specimen also available.