FIVE STEP WEDGE BLOCK (METRIC VERSION) ASME SA516 Gr 70 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 2.5mm – 12.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 2.5mm to 12.5mm in 2.5mm, 5.0mm, 7.5mm, 10.0mm and 12.5mm increments. 100mm (L) x 20mm (W) x 12.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: ASME SA516 Gr 70. NOTE: For special alloy request by mail.

FIVE STEP WEDGE BLOCK (METRIC VERSION) ASME SA517 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 2.5mm – 12.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 2.5mm to 12.5mm in 2.5mm, 5.0mm, 7.5mm, 10.0mm and 12.5mm increments. 100mm (L) x 20mm (W) x 12.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: ASME SA517. NOTE: For special alloy request by mail.

FIVE STEP WEDGE BLOCK (METRIC VERSION) ASME SA36 / A36 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 2.5mm – 12.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 2.5mm to 12.5mm in 2.5mm, 5.0mm, 7.5mm, 10.0mm and 12.5mm increments. 100mm (L) x 20mm (W) x 12.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: ASME SA36 / A36. NOTE: For special alloy request by mail.

FIVE STEP WEDGE BLOCK (METRIC VERSION) STAINLESS STEEL 304 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 2.5mm – 12.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 2.5mm to 12.5mm in 2.5mm, 5.0mm, 7.5mm, 10.0mm and 12.5mm increments. 100mm (L) x 20mm (W) x 12.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: STAINLESS STEEL 304. NOTE: For special alloy request by mail.

FIVE STEP WEDGE BLOCK (METRIC VERSION) STAINLESS STEEL 316 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 2.5mm – 12.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 2.5mm to 12.5mm in 2.5mm, 5.0mm, 7.5mm, 10.0mm and 12.5mm increments. 100mm (L) x 20mm (W) x 12.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: STAINLESS STEEL 316. NOTE: For special alloy request by mail.

FIVE STEP WEDGE BLOCK (METRIC VERSION) TITANIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 2.5mm – 12.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 2.5mm to 12.5mm in 2.5mm, 5.0mm, 7.5mm, 10.0mm and 12.5mm increments. 100mm (L) x 20mm (W) x 12.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: TITANIUM. NOTE: For special alloy request by mail.

FIVE STEP WEDGE BLOCK (METRIC VERSION) ALUMINUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 2.5mm – 12.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 2.5mm to 12.5mm in 2.5mm, 5.0mm, 7.5mm, 10.0mm and 12.5mm increments. 100mm (L) x 20mm (W) x 12.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: ALUMINUM. NOTE: For special alloy request by mail.

FIVE STEP WEDGE BLOCK (METRIC VERSION) COPPER Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 2.5mm – 12.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 2.5mm to 12.5mm in 2.5mm, 5.0mm, 7.5mm, 10.0mm and 12.5mm increments. 100mm (L) x 20mm (W) x 12.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: COPPER. NOTE: For special alloy request by mail.

FIVE STEP WEDGE BLOCK (METRIC VERSION) INCONEL 625 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 2.5mm – 12.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 2.5mm to 12.5mm in 2.5mm, 5.0mm, 7.5mm, 10.0mm and 12.5mm increments. 100mm (L) x 20mm (W) x 12.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: INCONEL 625. NOTE: For special alloy request by mail.

FIVE STEP WEDGE BLOCK (METRIC VERSION) INCONEL 825 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 2.5mm – 12.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 2.5mm to 12.5mm in 2.5mm, 5.0mm, 7.5mm, 10.0mm and 12.5mm increments. 100mm (L) x 20mm (W) x 12.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: INCONEL 825. NOTE: For special alloy request by mail.

FIVE STEP WEDGE BLOCK (METRIC VERSION) MONAL 800 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 2.5mm – 12.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 2.5mm to 12.5mm in 2.5mm, 5.0mm, 7.5mm, 10.0mm and 12.5mm increments. 100mm (L) x 20mm (W) x 12.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: MONAL 800. NOTE: For special alloy request by mail.

FIVE STEP WEDGE BLOCK (METRIC VERSION) MAGNESIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 2.5mm – 12.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 2.5mm to 12.5mm in 2.5mm, 5.0mm, 7.5mm, 10.0mm and 12.5mm increments. 100mm (L) x 20mm (W) x 12.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: MAGNESIUM. NOTE: For special alloy request by mail.

FIVE STEP WEDGE BLOCK (METRIC VERSION) NICKEL Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 2.5mm – 12.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 2.5mm to 12.5mm in 2.5mm, 5.0mm, 7.5mm, 10.0mm and 12.5mm increments. 100mm (L) x 20mm (W) x 12.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: NICKEL. NOTE: For special alloy request by mail.

FIVE STEP (11mm – 15mm) WEDGE BLOCK (METRIC VERSION) ASME SA516 Gr 70 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 11mm – 15mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 11mm to 15mm in 11mm, 12mm, 13mm, 14mm and 15mm increments. 100mm (L) x 20mm (W) x 15mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: ASME SA516 Gr 70. NOTE: For special alloy request by mail.

FIVE STEP (11mm – 15mm) WEDGE BLOCK (METRIC VERSION) ASME SA517 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 11mm – 15mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 11mm to 15mm in 11mm, 12mm, 13mm, 14mm and 15mm increments. 100mm (L) x 20mm (W) x 15mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: ASME SA517. NOTE: For special alloy request by mail.

FIVE STEP (11mm – 15mm) WEDGE BLOCK (METRIC VERSION) ASME SA36 / A36 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 11mm – 15mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 11mm to 15mm in 11mm, 12mm, 13mm, 14mm and 15mm increments. 100mm (L) x 20mm (W) x 15mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: ASME SA36 / A36. NOTE: For special alloy request by mail.

FIVE STEP (11mm – 15mm) WEDGE BLOCK (METRIC VERSION) STAINLESS STEEL 304 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 11mm – 15mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 11mm to 15mm in 11mm, 12mm, 13mm, 14mm and 15mm increments. 100mm (L) x 20mm (W) x 15mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: STAINLESS STEEL 304. NOTE: For special alloy request by mail.

FIVE STEP (11mm – 15mm) WEDGE BLOCK (METRIC VERSION) STAINLESS STEEL 316 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 11mm – 15mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 11mm to 15mm in 11mm, 12mm, 13mm, 14mm and 15mm increments. 100mm (L) x 20mm (W) x 15mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: STAINLESS STEEL 316. NOTE: For special alloy request by mail.

FIVE STEP (11mm – 15mm) WEDGE BLOCK (METRIC VERSION) TITANIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 11mm – 15mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 11mm to 15mm in 11mm, 12mm, 13mm, 14mm and 15mm increments. 100mm (L) x 20mm (W) x 15mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: TITANIUM. NOTE: For special alloy request by mail.

FIVE STEP (11mm – 15mm) WEDGE BLOCK (METRIC VERSION) ALUMINUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 11mm – 15mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 11mm to 15mm in 11mm, 12mm, 13mm, 14mm and 15mm increments. 100mm (L) x 20mm (W) x 15mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: ALUMINUM. NOTE: For special alloy request by mail.

FIVE STEP (11mm – 15mm) WEDGE BLOCK (METRIC VERSION) COPPER Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 11mm – 15mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 11mm to 15mm in 11mm, 12mm, 13mm, 14mm and 15mm increments. 100mm (L) x 20mm (W) x 15mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: COPPER. NOTE: For special alloy request by mail.

FIVE STEP (11mm – 15mm) WEDGE BLOCK (METRIC VERSION) INOCONEL 625 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 11mm – 15mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 11mm to 15mm in 11mm, 12mm, 13mm, 14mm and 15mm increments. 100mm (L) x 20mm (W) x 15mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: INOCONEL 625. NOTE: For special alloy request by mail.

FIVE STEP (11mm – 15mm) WEDGE BLOCK (METRIC VERSION) INCONEL 825 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 11mm – 15mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 11mm to 15mm in 11mm, 12mm, 13mm, 14mm and 15mm increments. 100mm (L) x 20mm (W) x 15mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: INCONEL 825. NOTE: For special alloy request by mail.

FIVE STEP (11mm – 15mm) WEDGE BLOCK (METRIC VERSION) MONAL 800 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 11mm – 15mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 11mm to 15mm in 11mm, 12mm, 13mm, 14mm and 15mm increments. 100mm (L) x 20mm (W) x 15mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: MONAL 800. NOTE: For special alloy request by mail.

FIVE STEP (11mm – 15mm) WEDGE BLOCK (METRIC VERSION) MAGNESIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 11mm – 15mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 11mm to 15mm in 11mm, 12mm, 13mm, 14mm and 15mm increments. 100mm (L) x 20mm (W) x 15mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: MAGNESIUM. NOTE: For special alloy request by mail.

FIVE STEP (11mm – 15mm) WEDGE BLOCK (METRIC VERSION) NICKEL Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 11mm – 15mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 11mm to 15mm in 11mm, 12mm, 13mm, 14mm and 15mm increments. 100mm (L) x 20mm (W) x 15mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: NICKEL. NOTE: For special alloy request by mail.

FIVE STEP (0.5mm – 2.5mm) WEDGE BLOCK (METRIC VERSION) ASME SA516 Gr 70 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 0.5mm – 2.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 0.5mm to 2.5mm in 0.5mm, 1.0mm, 1.5mm, 2.0mm and 2.5mm increments. 100mm (L) x 20mm (W) x 2.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: ASME SA516 Gr 70. NOTE: For special alloy request by mail.

FIVE STEP (0.5mm – 2.5mm) WEDGE BLOCK (METRIC VERSION) ASME SA517 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 0.5mm – 2.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 0.5mm to 2.5mm in 0.5mm, 1.0mm, 1.5mm, 2.0mm and 2.5mm increments. 100mm (L) x 20mm (W) x 2.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: ASME SA517. NOTE: For special alloy request by mail.

FIVE STEP (0.5mm – 2.5mm) WEDGE BLOCK (METRIC VERSION) ASME SA36 / A36 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 0.5mm – 2.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 0.5mm to 2.5mm in 0.5mm, 1.0mm, 1.5mm, 2.0mm and 2.5mm increments. 100mm (L) x 20mm (W) x 2.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: ASME SA36 / A36. NOTE: For special alloy request by mail.

FIVE STEP (0.5mm – 2.5mm) WEDGE BLOCK (METRIC VERSION) STAINLESS STEEL 304 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 0.5mm – 2.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 0.5mm to 2.5mm in 0.5mm, 1.0mm, 1.5mm, 2.0mm and 2.5mm increments. 100mm (L) x 20mm (W) x 2.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: STAINLESS STEEL 304. NOTE: For special alloy request by mail.

FIVE STEP (0.5mm – 2.5mm) WEDGE BLOCK (METRIC VERSION) STAINLESS STEEL 316 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 0.5mm – 2.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 0.5mm to 2.5mm in 0.5mm, 1.0mm, 1.5mm, 2.0mm and 2.5mm increments. 100mm (L) x 20mm (W) x 2.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: STAINLESS STEEL 316. NOTE: For special alloy request by mail.

FIVE STEP (0.5mm – 2.5mm) WEDGE BLOCK (METRIC VERSION) TITANIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 0.5mm – 2.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 0.5mm to 2.5mm in 0.5mm, 1.0mm, 1.5mm, 2.0mm and 2.5mm increments. 100mm (L) x 20mm (W) x 2.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: TITANIUM. NOTE: For special alloy request by mail.

FIVE STEP (0.5mm – 2.5mm) WEDGE BLOCK (METRIC VERSION) ALUMINUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 0.5mm – 2.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 0.5mm to 2.5mm in 0.5mm, 1.0mm, 1.5mm, 2.0mm and 2.5mm increments. 100mm (L) x 20mm (W) x 2.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: ALUMINUM. NOTE: For special alloy request by mail.

FIVE STEP (0.5mm – 2.5mm) WEDGE BLOCK (METRIC VERSION) COPPER Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 0.5mm – 2.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 0.5mm to 2.5mm in 0.5mm, 1.0mm, 1.5mm, 2.0mm and 2.5mm increments. 100mm (L) x 20mm (W) x 2.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: COPPER. NOTE: For special alloy request by mail.

FIVE STEP (0.5mm – 2.5mm) WEDGE BLOCK (METRIC VERSION) INCONEL 625 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 0.5mm – 2.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 0.5mm to 2.5mm in 0.5mm, 1.0mm, 1.5mm, 2.0mm and 2.5mm increments. 100mm (L) x 20mm (W) x 2.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: INCONEL 625. NOTE: For special alloy request by mail.

FIVE STEP (0.5mm – 2.5mm) WEDGE BLOCK (METRIC VERSION) INCONEL 825 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 0.5mm – 2.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 0.5mm to 2.5mm in 0.5mm, 1.0mm, 1.5mm, 2.0mm and 2.5mm increments. 100mm (L) x 20mm (W) x 2.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: INCONEL 825. NOTE: For special alloy request by mail.

FIVE STEP (0.5mm – 2.5mm) WEDGE BLOCK (METRIC VERSION) MONAL 800 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 0.5mm – 2.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 0.5mm to 2.5mm in 0.5mm, 1.0mm, 1.5mm, 2.0mm and 2.5mm increments. 100mm (L) x 20mm (W) x 2.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: MONAL 800. NOTE: For special alloy request by mail.

FIVE STEP (0.5mm – 2.5mm) WEDGE BLOCK (METRIC VERSION) MAGNESIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 0.5mm – 2.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 0.5mm to 2.5mm in 0.5mm, 1.0mm, 1.5mm, 2.0mm and 2.5mm increments. 100mm (L) x 20mm (W) x 2.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: MAGNESIUM. NOTE: For special alloy request by mail.

FIVE STEP (0.5mm – 2.5mm) WEDGE BLOCK (METRIC VERSION) NICKEL Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 0.5mm – 2.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 0.5mm to 2.5mm in 0.5mm, 1.0mm, 1.5mm, 2.0mm and 2.5mm increments. 100mm (L) x 20mm (W) x 2.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: NICKEL. NOTE: For special alloy request by mail.

FIVE STEP (0.63” – 0.8”) WEDGE BLOCK (METRIC VERSION) ASME SA516 Gr 70 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 16mm – 20mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 16mm to 20mm in 16mm, 17mm, 18mm, 19mm and 20mm increments. 100mm (L) x 20mm (W) x 20mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: ASME SA516 Gr 70. NOTE: For special alloy request by mail.

FIVE STEP (16mm – 20mm) WEDGE BLOCK (METRIC VERSION) ASME SA517 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 16mm – 20mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 16mm to 20mm in 16mm, 17mm, 18mm, 19mm and 20mm increments. 100mm (L) x 20mm (W) x 20mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: ASME SA517. NOTE: For special alloy request by mail.

FIVE STEP (16mm – 20mm) WEDGE BLOCK (METRIC VERSION) ASME SA36 / A36 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 16mm – 20mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 16mm to 20mm in 16mm, 17mm, 18mm, 19mm and 20mm increments. 100mm (L) x 20mm (W) x 20mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: ASME SA36 / A36. NOTE: For special alloy request by mail.

FIVE STEP (16mm – 20mm) WEDGE BLOCK (METRIC VERSION) STAINLESS STEEL 304 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 16mm – 20mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 16mm to 20mm in 16mm, 17mm, 18mm, 19mm and 20mm increments. 100mm (L) x 20mm (W) x 20mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: STAINLESS STEEL 304. NOTE: For special alloy request by mail.

FIVE STEP (16mm – 20mm) WEDGE BLOCK (METRIC VERSION) STAINLESS STEEL 316 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 16mm – 20mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 16mm to 20mm in 16mm, 17mm, 18mm, 19mm and 20mm increments. 100mm (L) x 20mm (W) x 20mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: STAINLESS STEEL 316. NOTE: For special alloy request by mail.

FIVE STEP (16mm – 20mm) WEDGE BLOCK (METRIC VERSION) TITANIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 16mm – 20mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 16mm to 20mm in 16mm, 17mm, 18mm, 19mm and 20mm increments. 100mm (L) x 20mm (W) x 20mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: TITANIUM. NOTE: For special alloy request by mail.

FIVE STEP (16mm – 20mm) WEDGE BLOCK (METRIC VERSION) ALUMINUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 16mm – 20mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 16mm to 20mm in 16mm, 17mm, 18mm, 19mm and 20mm increments. 100mm (L) x 20mm (W) x 20mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: ALUMINUM. NOTE: For special alloy request by mail.

FIVE STEP (16mm – 20mm) WEDGE BLOCK (METRIC VERSION) COPPER Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 16mm – 20mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 16mm to 20mm in 16mm, 17mm, 18mm, 19mm and 20mm increments. 100mm (L) x 20mm (W) x 20mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: COPPER. NOTE: For special alloy request by mail.

FIVE STEP (16mm – 20mm) WEDGE BLOCK (METRIC VERSION) INCONEL 625 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 16mm – 20mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 16mm to 20mm in 16mm, 17mm, 18mm, 19mm and 20mm increments. 100mm (L) x 20mm (W) x 20mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: INCONEL 625. NOTE: For special alloy request by mail.

FIVE STEP (16mm – 20mm) WEDGE BLOCK (METRIC VERSION) INCONEL 825 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 16mm – 20mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 16mm to 20mm in 16mm, 17mm, 18mm, 19mm and 20mm increments. 100mm (L) x 20mm (W) x 20mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: INCONEL 825. NOTE: For special alloy request by mail.

FIVE STEP (16mm – 20mm) WEDGE BLOCK (METRIC VERSION) MONAL 800 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 16mm – 20mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 16mm to 20mm in 16mm, 17mm, 18mm, 19mm and 20mm increments. 100mm (L) x 20mm (W) x 20mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: MONAL 800. NOTE: For special alloy request by mail.

FIVE STEP (16mm – 20mm) WEDGE BLOCK (METRIC VERSION) MAGNESIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 16mm – 20mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 16mm to 20mm in 16mm, 17mm, 18mm, 19mm and 20mm increments. 100mm (L) x 20mm (W) x 20mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: MAGNESIUM. NOTE: For special alloy request by mail.

FIVE STEP (16mm – 20mm) WEDGE BLOCK (METRIC VERSION) NICKEL Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 16mm – 20mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 16mm to 20mm in 16mm, 17mm, 18mm, 19mm and 20mm increments. 100mm (L) x 20mm (W) x 20mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: NICKEL. NOTE: For special alloy request by mail.

FIVE STEP (0.5mm – 3.2mm) WEDGE BLOCK (METRIC VERSION) ASME SA516 Gr 70 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 0.5mm – 3.2mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 0.5mm to 3.2mm in 0.5mm, 1.27mm, 1.9mm, 2.5mm and 3.2mm increments. 100mm (L) x 20mm (W) x 3.2mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: ASME SA516 Gr 70. NOTE: For special alloy request by mail.

FIVE STEP (0.5mm – 3.2mm) WEDGE BLOCK (METRIC VERSION) ASME SA517 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 0.5mm – 3.2mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 0.5mm to 3.2mm in 0.5mm, 1.27mm, 1.9mm, 2.5mm and 3.2mm increments. 100mm (L) x 20mm (W) x 3.2mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: ASME SA517. NOTE: For special alloy request by mail.

FIVE STEP (0.5mm – 3.2mm) WEDGE BLOCK (METRIC VERSION) ASME SA36 / A36 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 0.5mm – 3.2mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 0.5mm to 3.2mm in 0.5mm, 1.27mm, 1.9mm, 2.5mm and 3.2mm increments. 100mm (L) x 20mm (W) x 3.2mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: ASME SA36 / A36. NOTE: For special alloy request by mail.

FIVE STEP (0.5mm – 3.2mm) WEDGE BLOCK (METRIC VERSION) STAINLESS STEEL 304 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 0.5mm – 3.2mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 0.5mm to 3.2mm in 0.5mm, 1.27mm, 1.9mm, 2.5mm and 3.2mm increments. 100mm (L) x 20mm (W) x 3.2mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: STAINLESS STEEL 304. NOTE: For special alloy request by mail.

FIVE STEP (0.5mm – 3.2mm) WEDGE BLOCK (METRIC VERSION) STAINLESS STEEL 316 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 0.5mm – 3.2mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 0.5mm to 3.2mm in 0.5mm, 1.27mm, 1.9mm, 2.5mm and 3.2mm increments. 100mm (L) x 20mm (W) x 3.2mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: STAINLESS STEEL 316. NOTE: For special alloy request by mail.

FIVE STEP (0.5mm – 3.2mm) WEDGE BLOCK (METRIC VERSION) TITANIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 0.5mm – 3.2mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 0.5mm to 3.2mm in 0.5mm, 1.27mm, 1.9mm, 2.5mm and 3.2mm increments. 100mm (L) x 20mm (W) x 3.2mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: TITANIUM. NOTE: For special alloy request by mail.

FIVE STEP (0.5mm – 3.2mm) WEDGE BLOCK (METRIC VERSION) ALUMINUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 0.5mm – 3.2mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 0.5mm to 3.2mm in 0.5mm, 1.27mm, 1.9mm, 2.5mm and 3.2mm increments. 100mm (L) x 20mm (W) x 3.2mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: ALUMINUM. NOTE: For special alloy request by mail.

FIVE STEP (0.5mm – 3.2mm) WEDGE BLOCK (METRIC VERSION) COPPER Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 0.5mm – 3.2mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 0.5mm to 3.2mm in 0.5mm, 1.27mm, 1.9mm, 2.5mm and 3.2mm increments. 100mm (L) x 20mm (W) x 3.2mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: COPPER. NOTE: For special alloy request by mail.

FIVE STEP (0.5mm – 3.2mm) WEDGE BLOCK (METRIC VERSION) INCONEL 625 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 0.5mm – 3.2mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 0.5mm to 3.2mm in 0.5mm, 1.27mm, 1.9mm, 2.5mm and 3.2mm increments. 100mm (L) x 20mm (W) x 3.2mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: INCONEL 625. NOTE: For special alloy request by mail.

FIVE STEP (0.5mm – 3.2mm) WEDGE BLOCK (METRIC VERSION) INCONEL 825 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 0.5mm – 3.2mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 0.5mm to 3.2mm in 0.5mm, 1.27mm, 1.9mm, 2.5mm and 3.2mm increments. 100mm (L) x 20mm (W) x 3.2mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: INCONEL 825. NOTE: For special alloy request by mail.

FIVE STEP (0.5mm – 3.2mm) WEDGE BLOCK (METRIC VERSION) MONAL 800 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 0.5mm – 3.2mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 0.5mm to 3.2mm in 0.5mm, 1.27mm, 1.9mm, 2.5mm and 3.2mm increments. 100mm (L) x 20mm (W) x 3.2mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: MONAL 800. NOTE: For special alloy request by mail.

FIVE STEP (0.5mm – 3.2mm) WEDGE BLOCK (METRIC VERSION) MAGNESIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 0.5mm – 3.2mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 0.5mm to 3.2mm in 0.5mm, 1.27mm, 1.9mm, 2.5mm and 3.2mm increments. 100mm (L) x 20mm (W) x 3.2mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: MAGNESIUM. NOTE: For special alloy request by mail.

FIVE STEP (0.5mm – 3.2mm) WEDGE BLOCK (METRIC VERSION) NICKEL Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 0.5mm – 3.2mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 0.5mm to 3.2mm in 0.5mm, 1.27mm, 1.9mm, 2.5mm and 3.2mm increments. 100mm (L) x 20mm (W) x 3.2mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: NICKEL. NOTE: For special alloy request by mail.

FIVE STEP (1.6mm – 3.2mm) WEDGE BLOCK (METRIC VERSION) ASME SA516 Gr 70 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 1.6mm – 3.2mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 1.6mm to 3.2mm in 1.6mm, 1.8mm, 2.0mm, 2.5mm and 3.2mm increments. 100mm (L) x 20mm (W) x 3.2mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: ASME SA516 Gr 70. NOTE: For special alloy request by mail.

FIVE STEP (1.6mm – 3.2mm) WEDGE BLOCK (METRIC VERSION) ASME SA517 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 1.6mm – 3.2mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 1.6mm to 3.2mm in 1.6mm, 1.8mm, 2.0mm, 2.5mm and 3.2mm increments. 100mm (L) x 20mm (W) x 3.2mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: ASME SA517. NOTE: For special alloy request by mail.

FIVE STEP (1.6mm – 3.2mm) WEDGE BLOCK (METRIC VERSION) ASME SA36 / A36 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 1.6mm – 3.2mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 1.6mm to 3.2mm in 1.6mm, 1.8mm, 2.0mm, 2.5mm and 3.2mm increments. 100mm (L) x 20mm (W) x 3.2mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: ASME SA36 / A36. NOTE: For special alloy request by mail.

FIVE STEP (1.6mm – 3.2mm) WEDGE BLOCK (METRIC VERSION) STAINLESS STEEL 304 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 1.6mm – 3.2mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 1.6mm to 3.2mm in 1.6mm, 1.8mm, 2.0mm, 2.5mm and 3.2mm increments. 100mm (L) x 20mm (W) x 3.2mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: STAINLESS STEEL 304. NOTE: For special alloy request by mail.

FIVE STEP (1.6mm – 3.2mm) WEDGE BLOCK (METRIC VERSION) STAINLESS STEEL 316 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 1.6mm – 3.2mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 1.6mm to 3.2mm in 1.6mm, 1.8mm, 2.0mm, 2.5mm and 3.2mm increments. 100mm (L) x 20mm (W) x 3.2mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: STAINLESS STEEL 316. NOTE: For special alloy request by mail.

FIVE STEP (1.6mm – 3.2mm) WEDGE BLOCK (METRIC VERSION) TITANIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 1.6mm – 3.2mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 1.6mm to 3.2mm in 1.6mm, 1.8mm, 2.0mm, 2.5mm and 3.2mm increments. 100mm (L) x 20mm (W) x 3.2mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: TITANIUM. NOTE: For special alloy request by mail.

FIVE STEP (1.6mm – 3.2mm) WEDGE BLOCK (METRIC VERSION) ALUMINUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 1.6mm – 3.2mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 1.6mm to 3.2mm in 1.6mm, 1.8mm, 2.0mm, 2.5mm and 3.2mm increments. 100mm (L) x 20mm (W) x 3.2mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: ALUMINUM. NOTE: For special alloy request by mail.

FIVE STEP (1.6mm – 3.2mm) WEDGE BLOCK (METRIC VERSION) COPPER Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 1.6mm – 3.2mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 1.6mm to 3.2mm in 1.6mm, 1.8mm, 2.0mm, 2.5mm and 3.2mm increments. 100mm (L) x 20mm (W) x 3.2mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: COPPER. NOTE: For special alloy request by mail.

FIVE STEP (1.6mm – 3.2mm) WEDGE BLOCK (METRIC VERSION) INCONEL 625 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 1.6mm – 3.2mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 1.6mm to 3.2mm in 1.6mm, 1.8mm, 2.0mm, 2.5mm and 3.2mm increments. 100mm (L) x 20mm (W) x 3.2mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: INCONEL 625. NOTE: For special alloy request by mail.

FIVE STEP (1.6mm – 3.2mm) WEDGE BLOCK (METRIC VERSION) INCONEL 825 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 1.6mm – 3.2mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 1.6mm to 3.2mm in 1.6mm, 1.8mm, 2.0mm, 2.5mm and 3.2mm increments. 100mm (L) x 20mm (W) x 3.2mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: INCONEL 825. NOTE: For special alloy request by mail.

FIVE STEP (1.6mm – 3.2mm) WEDGE BLOCK (METRIC VERSION) MONAL 800 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 1.6mm – 3.2mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 1.6mm to 3.2mm in 1.6mm, 1.8mm, 2.0mm, 2.5mm and 3.2mm increments. 100mm (L) x 20mm (W) x 3.2mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: MONAL 800. NOTE: For special alloy request by mail.

FIVE STEP (1.6mm – 3.2mm) WEDGE BLOCK (METRIC VERSION) MAGNESIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 1.6mm – 3.2mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 1.6mm to 3.2mm in 1.6mm, 1.8mm, 2.0mm, 2.5mm and 3.2mm increments. 100mm (L) x 20mm (W) x 3.2mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: MAGNESIUM. NOTE: For special alloy request by mail.

FIVE STEP (1.6mm – 3.2mm) WEDGE BLOCK (METRIC VERSION) NICKEL Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 1.6mm – 3.2mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 1.6mm to 3.2mm in 1.6mm, 1.8mm, 2.0mm, 2.5mm and 3.2mm increments. 100mm (L) x 20mm (W) x 3.2mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: NICKEL. NOTE: For special alloy request by mail.

FIVE STEP (1mm – 5mm) WEDGE BLOCK (METRIC VERSION) ASME SA516 Gr 70 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 1mm – 5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 1mm to 5mm in 1.0mm, 2.0mm, 3.0mm, 4.0mm and 5.0mm increments. 100mm (L) x 20mm (W) x 5.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: ASME SA516 Gr 70. NOTE: For special alloy request by mail.

FIVE STEP (1mm – 5mm) WEDGE BLOCK (METRIC VERSION) ASME SA517 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 1mm – 5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 1mm to 5mm in 1.0mm, 2.0mm, 3.0mm, 4.0mm and 5.0mm increments. 100mm (L) x 20mm (W) x 5.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: ASME SA517. NOTE: For special alloy request by mail.

FIVE STEP (1mm – 5mm) WEDGE BLOCK (METRIC VERSION) ASME SA36 / A36 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 1mm – 5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 1mm to 5mm in 1.0mm, 2.0mm, 3.0mm, 4.0mm and 5.0mm increments. 100mm (L) x 20mm (W) x 5.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: ASME SA36 / A36. NOTE: For special alloy request by mail.

FIVE STEP (1mm – 5mm) WEDGE BLOCK (METRIC VERSION) STAINLESS STEEL 304 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 1mm – 5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 1mm to 5mm in 1.0mm, 2.0mm, 3.0mm, 4.0mm and 5.0mm increments. 100mm (L) x 20mm (W) x 5.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: STAINLESS STEEL 304. NOTE: For special alloy request by mail.

FIVE STEP (1mm – 5mm) WEDGE BLOCK (METRIC VERSION) STAINLESS STEEL 316 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 1mm – 5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 1mm to 5mm in 1.0mm, 2.0mm, 3.0mm, 4.0mm and 5.0mm increments. 100mm (L) x 20mm (W) x 5.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: STAINLESS STEEL 316. NOTE: For special alloy request by mail.

FIVE STEP (1mm – 5mm) WEDGE BLOCK (METRIC VERSION) TITANIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 1mm – 5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 1mm to 5mm in 1.0mm, 2.0mm, 3.0mm, 4.0mm and 5.0mm increments. 100mm (L) x 20mm (W) x 5.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: TITANIUM. NOTE: For special alloy request by mail.

FIVE STEP (1mm – 5mm) WEDGE BLOCK (METRIC VERSION) ALUMINUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 1mm – 5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 1mm to 5mm in 1.0mm, 2.0mm, 3.0mm, 4.0mm and 5.0mm increments. 100mm (L) x 20mm (W) x 5.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: ALUMINUM. NOTE: For special alloy request by mail.

FIVE STEP (1mm – 5mm) WEDGE BLOCK (METRIC VERSION) COPPER Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 1mm – 5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 1mm to 5mm in 1.0mm, 2.0mm, 3.0mm, 4.0mm and 5.0mm increments. 100mm (L) x 20mm (W) x 5.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: COPPER. NOTE: For special alloy request by mail.

FIVE STEP (1mm – 5mm) WEDGE BLOCK (METRIC VERSION) INCONEL 625 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 1mm – 5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 1mm to 5mm in 1.0mm, 2.0mm, 3.0mm, 4.0mm and 5.0mm increments. 100mm (L) x 20mm (W) x 5.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: INCONEL 625. NOTE: For special alloy request by mail.

FIVE STEP (1mm – 5mm) WEDGE BLOCK (METRIC VERSION) INCONEL 825 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 1mm – 5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 1mm to 5mm in 1.0mm, 2.0mm, 3.0mm, 4.0mm and 5.0mm increments. 100mm (L) x 20mm (W) x 5.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: INCONEL 825. NOTE: For special alloy request by mail.

FIVE STEP (1mm – 5mm) WEDGE BLOCK (METRIC VERSION) MONAL 800 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 1mm – 5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 1mm to 5mm in 1.0mm, 2.0mm, 3.0mm, 4.0mm and 5.0mm increments. 100mm (L) x 20mm (W) x 5.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: MONAL 800. NOTE: For special alloy request by mail.

FIVE STEP (1mm – 5mm) WEDGE BLOCK (METRIC VERSION) MAGNESIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 1mm – 5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 1mm to 5mm in 1.0mm, 2.0mm, 3.0mm, 4.0mm and 5.0mm increments. 100mm (L) x 20mm (W) x 5.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: MAGNESIUM. NOTE: For special alloy request by mail.

FIVE STEP (1mm – 5mm) WEDGE BLOCK (METRIC VERSION) NICKEL Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 1mm – 5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 1mm to 5mm in 1.0mm, 2.0mm, 3.0mm, 4.0mm and 5.0mm increments. 100mm (L) x 20mm (W) x 5.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: NICKEL. NOTE: For special alloy request by mail.

FIVE STEP (1.25mm – 10.0mm) WEDGE BLOCK (METRIC VERSION) ASME SA516 Gr70 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 1.25mm – 10.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 1.25mm to 10.0mm in 1.25mm, 2.5mm, 5.0mm, 7.5mm and 10.0mm increments. 120mm (L) x 20mm (W) x 10.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: ASME SA516 Gr70. NOTE: For special alloy request by mail.

FIVE STEP (1.25mm – 10.0mm) WEDGE BLOCK (METRIC VERSION) ASME SA517 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 1.25mm – 10.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 1.25mm to 10.0mm in 1.25mm, 2.5mm, 5.0mm, 7.5mm and 10.0mm increments. 120mm (L) x 20mm (W) x 10.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: ASME SA517. NOTE: For special alloy request by mail.

FIVE STEP (1.25mm – 10.0mm) WEDGE BLOCK (METRIC VERSION) ASME SA36 / A36 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 1.25mm – 10.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 1.25mm to 10.0mm in 1.25mm, 2.5mm, 5.0mm, 7.5mm and 10.0mm increments. 120mm (L) x 20mm (W) x 10.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: ASME SA36 / A36. NOTE: For special alloy request by mail.

FIVE STEP (1.25mm – 10.0mm) WEDGE BLOCK (METRIC VERSION) STAINLESS STEEL 304 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 1.25mm – 10.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 1.25mm to 10.0mm in 1.25mm, 2.5mm, 5.0mm, 7.5mm and 10.0mm increments. 120mm (L) x 20mm (W) x 10.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: STAINLESS STEEL 304. NOTE: For special alloy request by mail.

FIVE STEP (1.25mm – 10.0mm) WEDGE BLOCK (METRIC VERSION) STAINLESS STEEL 316 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 1.25mm – 10.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 1.25mm to 10.0mm in 1.25mm, 2.5mm, 5.0mm, 7.5mm and 10.0mm increments. 120mm (L) x 20mm (W) x 10.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: STAINLESS STEEL 316. NOTE: For special alloy request by mail.

FIVE STEP (1.25mm – 10.0mm) WEDGE BLOCK (METRIC VERSION) TITANIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 1.25mm – 10.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 1.25mm to 10.0mm in 1.25mm, 2.5mm, 5.0mm, 7.5mm and 10.0mm increments. 120mm (L) x 20mm (W) x 10.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: TITANIUM. NOTE: For special alloy request by mail.

FIVE STEP (1.25mm – 10.0mm) WEDGE BLOCK (METRIC VERSION) ALUMINUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 1.25mm – 10.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 1.25mm to 10.0mm in 1.25mm, 2.5mm, 5.0mm, 7.5mm and 10.0mm increments. 120mm (L) x 20mm (W) x 10.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: ALUMINUM. NOTE: For special alloy request by mail.

FIVE STEP (1.25mm – 10.0mm) WEDGE BLOCK (METRIC VERSION) COPPER Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 1.25mm – 10.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 1.25mm to 10.0mm in 1.25mm, 2.5mm, 5.0mm, 7.5mm and 10.0mm increments. 120mm (L) x 20mm (W) x 10.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: COPPER. NOTE: For special alloy request by mail.

FIVE STEP (1.25mm – 10.0mm) WEDGE BLOCK (METRIC VERSION) INCONEL 625 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 1.25mm – 10.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 1.25mm to 10.0mm in 1.25mm, 2.5mm, 5.0mm, 7.5mm and 10.0mm increments. 120mm (L) x 20mm (W) x 10.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: INCONEL 625. NOTE: For special alloy request by mail.

FIVE STEP (1.25mm – 10.0mm) WEDGE BLOCK (METRIC VERSION) INCONEL 825 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 1.25mm – 10.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 1.25mm to 10.0mm in 1.25mm, 2.5mm, 5.0mm, 7.5mm and 10.0mm increments. 120mm (L) x 20mm (W) x 10.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: INCONEL 825. NOTE: For special alloy request by mail.

FIVE STEP (1.25mm – 10.0mm) WEDGE BLOCK (METRIC VERSION) MONAL 800 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 1.25mm – 10.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 1.25mm to 10.0mm in 1.25mm, 2.5mm, 5.0mm, 7.5mm and 10.0mm increments. 120mm (L) x 20mm (W) x 10.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: MONAL 800. NOTE: For special alloy request by mail.

FIVE STEP (1.25mm – 10.0mm) WEDGE BLOCK (METRIC VERSION) MAGNESIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 1.25mm – 10.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 1.25mm to 10.0mm in 1.25mm, 2.5mm, 5.0mm, 7.5mm and 10.0mm increments. 120mm (L) x 20mm (W) x 10.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: MAGNESIUM. NOTE: For special alloy request by mail.

FIVE STEP (1.25mm – 10.0mm) WEDGE BLOCK (METRIC VERSION) NICKEL Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 1.25mm – 10.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 1.25mm to 10.0mm in 1.25mm, 2.5mm, 5.0mm, 7.5mm and 10.0mm increments. 120mm (L) x 20mm (W) x 10.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: NICKEL. NOTE: For special alloy request by mail.

FIVE STEP (25mm – 75.0mm) WEDGE BLOCK (METRIC VERSION) ASME SA516 Gr70 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 25.0mm – 75.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 25.0mm to 75.0mm in 25.0mm, 38.0mm, 50.0mm, 63.5mm and 75.0mm increments. 125mm (L) x 25mm (W) x 75.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: ASME SA516 Gr70. NOTE: For special alloy request by mail.

FIVE STEP (25mm – 75.0mm) WEDGE BLOCK (METRIC VERSION) ASME SA517 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 25.0mm – 75.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 25.0mm to 75.0mm in 25.0mm, 38.0mm, 50.0mm, 63.5mm and 75.0mm increments. 125mm (L) x 25mm (W) x 75.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: ASME SA517. NOTE: For special alloy request by mail.

FIVE STEP (25mm – 75.0mm) WEDGE BLOCK (METRIC VERSION) ASME SA36 / A36 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 25.0mm – 75.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 25.0mm to 75.0mm in 25.0mm, 38.0mm, 50.0mm, 63.5mm and 75.0mm increments. 125mm (L) x 25mm (W) x 75.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: ASME SA36 / A36. NOTE: For special alloy request by mail.

FIVE STEP (25mm – 75.0mm) WEDGE BLOCK (METRIC VERSION) STAINLESS STEEL 304 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 25.0mm – 75.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 25.0mm to 75.0mm in 25.0mm, 38.0mm, 50.0mm, 63.5mm and 75.0mm increments. 125mm (L) x 25mm (W) x 75.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: STAINLESS STEEL 304. NOTE: For special alloy request by mail.

FIVE STEP (25mm – 75.0mm) WEDGE BLOCK (METRIC VERSION) STAINLESS STEEL 316 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 25.0mm – 75.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 25.0mm to 75.0mm in 25.0mm, 38.0mm, 50.0mm, 63.5mm and 75.0mm increments. 125mm (L) x 25mm (W) x 75.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: STAINLESS STEEL 316. NOTE: For special alloy request by mail.

FIVE STEP (25mm – 75.0mm) WEDGE BLOCK (METRIC VERSION) TITANIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 25.0mm – 75.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 25.0mm to 75.0mm in 25.0mm, 38.0mm, 50.0mm, 63.5mm and 75.0mm increments. 125mm (L) x 25mm (W) x 75.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: TITANIUM. NOTE: For special alloy request by mail.

FIVE STEP (25mm – 75.0mm) WEDGE BLOCK (METRIC VERSION) ALUMINUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 25.0mm – 75.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 25.0mm to 75.0mm in 25.0mm, 38.0mm, 50.0mm, 63.5mm and 75.0mm increments. 125mm (L) x 25mm (W) x 75.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: ALUMINUM. NOTE: For special alloy request by mail.

FIVE STEP (25mm – 75.0mm) WEDGE BLOCK (METRIC VERSION) COPPER Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 25.0mm – 75.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 25.0mm to 75.0mm in 25.0mm, 38.0mm, 50.0mm, 63.5mm and 75.0mm increments. 125mm (L) x 25mm (W) x 75.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: COPPER. NOTE: For special alloy request by mail.

FIVE STEP (25mm – 75.0mm) WEDGE BLOCK (METRIC VERSION) INCONEL 625 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 25.0mm – 75.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 25.0mm to 75.0mm in 25.0mm, 38.0mm, 50.0mm, 63.5mm and 75.0mm increments. 125mm (L) x 25mm (W) x 75.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: INCONEL 625. NOTE: For special alloy request by mail.

FIVE STEP (25mm – 75.0mm) WEDGE BLOCK (METRIC VERSION) INCONEL 825 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 25.0mm – 75.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 25.0mm to 75.0mm in 25.0mm, 38.0mm, 50.0mm, 63.5mm and 75.0mm increments. 125mm (L) x 25mm (W) x 75.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: INCONEL 825. NOTE: For special alloy request by mail.

FIVE STEP (25mm – 75.0mm) WEDGE BLOCK (METRIC VERSION) MONAL 800 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 25.0mm – 75.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 25.0mm to 75.0mm in 25.0mm, 38.0mm, 50.0mm, 63.5mm and 75.0mm increments. 125mm (L) x 25mm (W) x 75.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: MONAL 800. NOTE: For special alloy request by mail.

FIVE STEP (25mm – 75.0mm) WEDGE BLOCK (METRIC VERSION) MAGNESIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 25.0mm – 75.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 25.0mm to 75.0mm in 25.0mm, 38.0mm, 50.0mm, 63.5mm and 75.0mm increments. 125mm (L) x 25mm (W) x 75.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: MAGNESIUM. NOTE: For special alloy request by mail.

FIVE STEP (25mm – 75.0mm) WEDGE BLOCK (METRIC VERSION) NICKEL Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 25.0mm – 75.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 25.0mm to 75.0mm in 25.0mm, 38.0mm, 50.0mm, 63.5mm and 75.0mm increments. 125mm (L) x 25mm (W) x 75.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: NICKEL. NOTE: For special alloy request by mail.

FIVE STEP (0.75mm – 9.5mm) WEDGE BLOCK (METRIC VERSION) ASME SA516 Gr70 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 0.75mm – 9.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 0.75mm to 9.5mm in 0.75mm, 1.5mm, 3.25mm, 6.35mm and 9.5mm increments. 125mm (L) x 25mm (W) x 9.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: ASME SA516 Gr70. NOTE: For special alloy request by mail.

FIVE STEP (0.75mm – 9.5mm) WEDGE BLOCK (METRIC VERSION) ASME SA517 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 0.75mm – 9.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 0.75mm to 9.5mm in 0.75mm, 1.5mm, 3.25mm, 6.35mm and 9.5mm increments. 125mm (L) x 25mm (W) x 9.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: ASME SA517. NOTE: For special alloy request by mail.

FIVE STEP (0.75mm – 9.5mm) WEDGE BLOCK (METRIC VERSION) ASME SA36 / A36 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 0.75mm – 9.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 0.75mm to 9.5mm in 0.75mm, 1.5mm, 3.25mm, 6.35mm and 9.5mm increments. 125mm (L) x 25mm (W) x 9.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: ASME SA36 / A36. NOTE: For special alloy request by mail.

FIVE STEP (0.75mm – 9.5mm) WEDGE BLOCK (METRIC VERSION) STAINLESS STEEL 304 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 0.75mm – 9.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 0.75mm to 9.5mm in 0.75mm, 1.5mm, 3.25mm, 6.35mm and 9.5mm increments. 125mm (L) x 25mm (W) x 9.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: STAINLESS STEEL 304. NOTE: For special alloy request by mail.

FIVE STEP (0.75mm – 9.5mm) WEDGE BLOCK (METRIC VERSION) STAINLESS STEEL 316 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 0.75mm – 9.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 0.75mm to 9.5mm in 0.75mm, 1.5mm, 3.25mm, 6.35mm and 9.5mm increments. 125mm (L) x 25mm (W) x 9.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: STAINLESS STEEL 316. NOTE: For special alloy request by mail.

FIVE STEP (0.75mm – 9.5mm) WEDGE BLOCK (METRIC VERSION) TITANIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 0.75mm – 9.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 0.75mm to 9.5mm in 0.75mm, 1.5mm, 3.25mm, 6.35mm and 9.5mm increments. 125mm (L) x 25mm (W) x 9.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: TITANIUM. NOTE: For special alloy request by mail.

FIVE STEP (0.75mm – 9.5mm) WEDGE BLOCK (METRIC VERSION) ALUMINUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 0.75mm – 9.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 0.75mm to 9.5mm in 0.75mm, 1.5mm, 3.25mm, 6.35mm and 9.5mm increments. 125mm (L) x 25mm (W) x 9.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: ALUMINUM. NOTE: For special alloy request by mail.

FIVE STEP (0.75mm – 9.5mm) WEDGE BLOCK (METRIC VERSION) COPPER Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 0.75mm – 9.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 0.75mm to 9.5mm in 0.75mm, 1.5mm, 3.25mm, 6.35mm and 9.5mm increments. 125mm (L) x 25mm (W) x 9.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: COPPER. NOTE: For special alloy request by mail.

FIVE STEP (0.75mm – 9.5mm) WEDGE BLOCK (METRIC VERSION) INCONEL 625 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 0.75mm – 9.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 0.75mm to 9.5mm in 0.75mm, 1.5mm, 3.25mm, 6.35mm and 9.5mm increments. 125mm (L) x 25mm (W) x 9.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: INCONEL 625. NOTE: For special alloy request by mail.

FIVE STEP (0.75mm – 9.5mm) WEDGE BLOCK (METRIC VERSION) INCONEL 825 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 0.75mm – 9.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 0.75mm to 9.5mm in 0.75mm, 1.5mm, 3.25mm, 6.35mm and 9.5mm increments. 125mm (L) x 25mm (W) x 9.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: INCONEL 825. NOTE: For special alloy request by mail.

FIVE STEP (0.75mm – 9.5mm) WEDGE BLOCK (METRIC VERSION) MONAL 800 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 0.75mm – 9.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 0.75mm to 9.5mm in 0.75mm, 1.5mm, 3.25mm, 6.35mm and 9.5mm increments. 125mm (L) x 25mm (W) x 9.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: MONAL 800. NOTE: For special alloy request by mail.

FIVE STEP (0.75mm – 9.5mm) WEDGE BLOCK (METRIC VERSION) MAGNESIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 0.75mm – 9.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 0.75mm to 9.5mm in 0.75mm, 1.5mm, 3.25mm, 6.35mm and 9.5mm increments. 125mm (L) x 25mm (W) x 9.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: MAGNESIUM. NOTE: For special alloy request by mail.

FIVE STEP (0.75mm – 9.5mm) WEDGE BLOCK (METRIC VERSION) NICKEL Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 0.75mm – 9.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 0.75mm to 9.5mm in 0.75mm, 1.5mm, 3.25mm, 6.35mm and 9.5mm increments. 125mm (L) x 25mm (W) x 9.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: NICKEL. NOTE: For special alloy request by mail.

FIVE STEP (6.0mm – 10.0mm) WEDGE BLOCK (METRIC VERSION) ASME SA516 Gr70 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 6.0mm – 10.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 6.0mm to 10.0mm in 6.0mm, 7.0mm, 8.0mm, 9.0mm and 10.0mm increments. 125mm (L) x 25mm (W) x 10.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: ASME SA516 Gr70. NOTE: For special alloy request by mail.

FIVE STEP (6.0mm – 10.0mm) WEDGE BLOCK (METRIC VERSION) ASME SA517 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 6.0mm – 10.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 6.0mm to 10.0mm in 6.0mm, 7.0mm, 8.0mm, 9.0mm and 10.0mm increments. 125mm (L) x 25mm (W) x 10.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: ASME SA517. NOTE: For special alloy request by mail.

FIVE STEP (6.0mm – 10.0mm) WEDGE BLOCK (METRIC VERSION) ASME SA36 / A36 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 6.0mm – 10.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 6.0mm to 10.0mm in 6.0mm, 7.0mm, 8.0mm, 9.0mm and 10.0mm increments. 125mm (L) x 25mm (W) x 10.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: ASME SA36 / A36. NOTE: For special alloy request by mail.

FIVE STEP (6.0mm – 10.0mm) WEDGE BLOCK (METRIC VERSION) STAINLESS STEEL 304 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 6.0mm – 10.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 6.0mm to 10.0mm in 6.0mm, 7.0mm, 8.0mm, 9.0mm and 10.0mm increments. 125mm (L) x 25mm (W) x 10.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: STAINLESS STEEL 304. NOTE: For special alloy request by mail.

FIVE STEP (6.0mm – 10.0mm) WEDGE BLOCK (METRIC VERSION) STAINLESS STEEL 316 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 6.0mm – 10.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 6.0mm to 10.0mm in 6.0mm, 7.0mm, 8.0mm, 9.0mm and 10.0mm increments. 125mm (L) x 25mm (W) x 10.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: STAINLESS STEEL 316. NOTE: For special alloy request by mail.

FIVE STEP (6.0mm – 10.0mm) WEDGE BLOCK (METRIC VERSION) TITANIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 6.0mm – 10.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 6.0mm to 10.0mm in 6.0mm, 7.0mm, 8.0mm, 9.0mm and 10.0mm increments. 125mm (L) x 25mm (W) x 10.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: TITANIUM. NOTE: For special alloy request by mail.

FIVE STEP (6.0mm – 10.0mm) WEDGE BLOCK (METRIC VERSION) ALUMINUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 6.0mm – 10.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 6.0mm to 10.0mm in 6.0mm, 7.0mm, 8.0mm, 9.0mm and 10.0mm increments. 125mm (L) x 25mm (W) x 10.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: ALUMINUM. NOTE: For special alloy request by mail.

FIVE STEP (6.0mm – 10.0mm) WEDGE BLOCK (METRIC VERSION) COPPER Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 6.0mm – 10.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 6.0mm to 10.0mm in 6.0mm, 7.0mm, 8.0mm, 9.0mm and 10.0mm increments. 125mm (L) x 25mm (W) x 10.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: COPPER. NOTE: For special alloy request by mail.

FIVE STEP (6.0mm – 10.0mm) WEDGE BLOCK (METRIC VERSION) INCONEL 625 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 6.0mm – 10.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 6.0mm to 10.0mm in 6.0mm, 7.0mm, 8.0mm, 9.0mm and 10.0mm increments. 125mm (L) x 25mm (W) x 10.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: INCONEL 625. NOTE: For special alloy request by mail.

FIVE STEP (6.0mm – 10.0mm) WEDGE BLOCK (METRIC VERSION) INCONEL 825 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 6.0mm – 10.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 6.0mm to 10.0mm in 6.0mm, 7.0mm, 8.0mm, 9.0mm and 10.0mm increments. 125mm (L) x 25mm (W) x 10.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: INCONEL 825. NOTE: For special alloy request by mail.

FIVE STEP (6.0mm – 10.0mm) WEDGE BLOCK (METRIC VERSION) MONAL 800 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 6.0mm – 10.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 6.0mm to 10.0mm in 6.0mm, 7.0mm, 8.0mm, 9.0mm and 10.0mm increments. 125mm (L) x 25mm (W) x 10.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: MONAL 800. NOTE: For special alloy request by mail.

FIVE STEP (6.0mm – 10.0mm) WEDGE BLOCK (METRIC VERSION) MAGNESIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 6.0mm – 10.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 6.0mm to 10.0mm in 6.0mm, 7.0mm, 8.0mm, 9.0mm and 10.0mm increments. 125mm (L) x 25mm (W) x 10.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: MAGNESIUM. NOTE: For special alloy request by mail.

FIVE STEP (6.0mm – 10.0mm) WEDGE BLOCK (METRIC VERSION) NICKEL Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 6.0mm – 10.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 6.0mm to 10.0mm in 6.0mm, 7.0mm, 8.0mm, 9.0mm and 10.0mm increments. 125mm (L) x 25mm (W) x 10.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: NICKEL. NOTE: For special alloy request by mail.

FIVE STEP (0.5mm – 15.0mm) WEDGE BLOCK (METRIC VERSION) ASME SA516 Gr70 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 0.5mm – 15.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 0.5mm to 15.0mm in 0.5mm, 1.5mm, 3.5mm, 7.5mm and 15.0mm increments. 125mm (L) x 25mm (W) x 15.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: ASME SA516 Gr70. NOTE: For special alloy request by mail.

FIVE STEP (0.5mm – 15.0mm) WEDGE BLOCK (METRIC VERSION) ASME SA517 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 0.5mm – 15.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 0.5mm to 15.0mm in 0.5mm, 1.5mm, 3.5mm, 7.5mm and 15.0mm increments. 125mm (L) x 25mm (W) x 15.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: ASME SA517. NOTE: For special alloy request by mail.

FIVE STEP (0.5mm – 15.0mm) WEDGE BLOCK (METRIC VERSION) ASME SA36 / A36 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 0.5mm – 15.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 0.5mm to 15.0mm in 0.5mm, 1.5mm, 3.5mm, 7.5mm and 15.0mm increments. 125mm (L) x 25mm (W) x 15.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: ASME SA36 / A36. NOTE: For special alloy request by mail.

FIVE STEP (0.5mm – 15.0mm) WEDGE BLOCK (METRIC VERSION) STAINLESS STEEL 304 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 0.5mm – 15.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 0.5mm to 15.0mm in 0.5mm, 1.5mm, 3.5mm, 7.5mm and 15.0mm increments. 125mm (L) x 25mm (W) x 15.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: STAINLESS STEEL 304. NOTE: For special alloy request by mail.

FIVE STEP (0.5mm – 15.0mm) WEDGE BLOCK (METRIC VERSION) STAINLESS STEEL 316 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 0.5mm – 15.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 0.5mm to 15.0mm in 0.5mm, 1.5mm, 3.5mm, 7.5mm and 15.0mm increments. 125mm (L) x 25mm (W) x 15.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: STAINLESS STEEL 316. NOTE: For special alloy request by mail.

FIVE STEP (0.5mm – 15.0mm) WEDGE BLOCK (METRIC VERSION) TITANIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 0.5mm – 15.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 0.5mm to 15.0mm in 0.5mm, 1.5mm, 3.5mm, 7.5mm and 15.0mm increments. 125mm (L) x 25mm (W) x 15.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: TITANIUM. NOTE: For special alloy request by mail.

FIVE STEP (0.5mm – 15.0mm) WEDGE BLOCK (METRIC VERSION) ALUMINUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 0.5mm – 15.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 0.5mm to 15.0mm in 0.5mm, 1.5mm, 3.5mm, 7.5mm and 15.0mm increments. 125mm (L) x 25mm (W) x 15.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: ALUMINUM. NOTE: For special alloy request by mail.

FIVE STEP (0.5mm – 15.0mm) WEDGE BLOCK (METRIC VERSION) COPPER Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 0.5mm – 15.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 0.5mm to 15.0mm in 0.5mm, 1.5mm, 3.5mm, 7.5mm and 15.0mm increments. 125mm (L) x 25mm (W) x 15.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: COPPER. NOTE: For special alloy request by mail.

FIVE STEP (0.5mm – 15.0mm) WEDGE BLOCK (METRIC VERSION) INCONEL 625 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 0.5mm – 15.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 0.5mm to 15.0mm in 0.5mm, 1.5mm, 3.5mm, 7.5mm and 15.0mm increments. 125mm (L) x 25mm (W) x 15.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: INCONEL 625. NOTE: For special alloy request by mail.

FIVE STEP (0.5mm – 15.0mm) WEDGE BLOCK (METRIC VERSION) INCONEL 825 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 0.5mm – 15.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 0.5mm to 15.0mm in 0.5mm, 1.5mm, 3.5mm, 7.5mm and 15.0mm increments. 125mm (L) x 25mm (W) x 15.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: INCONEL 825. NOTE: For special alloy request by mail.

FIVE STEP (0.5mm – 15.0mm) WEDGE BLOCK (METRIC VERSION) MONAL 800 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 0.5mm – 15.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 0.5mm to 15.0mm in 0.5mm, 1.5mm, 3.5mm, 7.5mm and 15.0mm increments. 125mm (L) x 25mm (W) x 15.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: MONAL 800. NOTE: For special alloy request by mail.

FIVE STEP (0.5mm – 15.0mm) WEDGE BLOCK (METRIC VERSION) MAGNESIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 0.5mm – 15.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 0.5mm to 15.0mm in 0.5mm, 1.5mm, 3.5mm, 7.5mm and 15.0mm increments. 125mm (L) x 25mm (W) x 15.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: MAGNESIUM. NOTE: For special alloy request by mail.

FIVE STEP (0.5mm – 15.0mm) WEDGE BLOCK (METRIC VERSION) NICKEL Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 0.5mm – 15.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 0.5mm to 15.0mm in 0.5mm, 1.5mm, 3.5mm, 7.5mm and 15.0mm increments. 125mm (L) x 25mm (W) x 15.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: NICKEL. NOTE: For special alloy request by mail.

FIVE STEP (5.0mm – 15.0mm) WEDGE BLOCK (METRIC VERSION) ASME SA516 Gr70 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 5.0mm – 15.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 5.0mm to 15.0mm in 5.0mm, 7.5mm, 10.0mm, 12.5mm and 15.0mm increments. 125mm (L) x 25mm (W) x 15.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: ASME SA516 Gr70. NOTE: For special alloy request by mail.

FIVE STEP (5.0mm – 15.0mm) WEDGE BLOCK (METRIC VERSION) ASME SA517 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 5.0mm – 15.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 5.0mm to 15.0mm in 5.0mm, 7.5mm, 10.0mm, 12.5mm and 15.0mm increments. 125mm (L) x 25mm (W) x 15.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: ASME SA517. NOTE: For special alloy request by mail.

FIVE STEP (5.0mm – 15.0mm) WEDGE BLOCK (METRIC VERSION) ASME SA36 / A36 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 5.0mm – 15.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 5.0mm to 15.0mm in 5.0mm, 7.5mm, 10.0mm, 12.5mm and 15.0mm increments. 125mm (L) x 25mm (W) x 15.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: ASME SA36 / A36. NOTE: For special alloy request by mail.

FIVE STEP (5.0mm – 15.0mm) WEDGE BLOCK (METRIC VERSION) STAINLESS STEEL 304 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 5.0mm – 15.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 5.0mm to 15.0mm in 5.0mm, 7.5mm, 10.0mm, 12.5mm and 15.0mm increments. 125mm (L) x 25mm (W) x 15.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: STAINLESS STEEL 304. NOTE: For special alloy request by mail.

FIVE STEP (5.0mm – 15.0mm) WEDGE BLOCK (METRIC VERSION) STAINLESS STEEL 316 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 5.0mm – 15.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 5.0mm to 15.0mm in 5.0mm, 7.5mm, 10.0mm, 12.5mm and 15.0mm increments. 125mm (L) x 25mm (W) x 15.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: STAINLESS STEEL 316. NOTE: For special alloy request by mail.

FIVE STEP (5.0mm – 15.0mm) WEDGE BLOCK (METRIC VERSION) TITANIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 5.0mm – 15.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 5.0mm to 15.0mm in 5.0mm, 7.5mm, 10.0mm, 12.5mm and 15.0mm increments. 125mm (L) x 25mm (W) x 15.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: TITANIUM. NOTE: For special alloy request by mail.

FIVE STEP (5.0mm – 15.0mm) WEDGE BLOCK (METRIC VERSION) ALUMINUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 5.0mm – 15.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 5.0mm to 15.0mm in 5.0mm, 7.5mm, 10.0mm, 12.5mm and 15.0mm increments. 125mm (L) x 25mm (W) x 15.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: ALUMINUM. NOTE: For special alloy request by mail.

FIVE STEP (5.0mm – 15.0mm) WEDGE BLOCK (METRIC VERSION) COPPER Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 5.0mm – 15.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 5.0mm to 15.0mm in 5.0mm, 7.5mm, 10.0mm, 12.5mm and 15.0mm increments. 125mm (L) x 25mm (W) x 15.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: COPPER. NOTE: For special alloy request by mail.

FIVE STEP (5.0mm – 15.0mm) WEDGE BLOCK (METRIC VERSION) INCONEL 625 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 5.0mm – 15.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 5.0mm to 15.0mm in 5.0mm, 7.5mm, 10.0mm, 12.5mm and 15.0mm increments. 125mm (L) x 25mm (W) x 15.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: INCONEL 625. NOTE: For special alloy request by mail.

FIVE STEP (5.0mm – 15.0mm) WEDGE BLOCK (METRIC VERSION) INCONEL 825 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 5.0mm – 15.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 5.0mm to 15.0mm in 5.0mm, 7.5mm, 10.0mm, 12.5mm and 15.0mm increments. 125mm (L) x 25mm (W) x 15.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: INCONEL 825. NOTE: For special alloy request by mail.

FIVE STEP (5.0mm – 15.0mm) WEDGE BLOCK (METRIC VERSION) MONAL 800 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 5.0mm – 15.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 5.0mm to 15.0mm in 5.0mm, 7.5mm, 10.0mm, 12.5mm and 15.0mm increments. 125mm (L) x 25mm (W) x 15.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: MONAL 800. NOTE: For special alloy request by mail.

FIVE STEP (5.0mm – 15.0mm) WEDGE BLOCK (METRIC VERSION) MAGNESIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 5.0mm – 15.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 5.0mm to 15.0mm in 5.0mm, 7.5mm, 10.0mm, 12.5mm and 15.0mm increments. 125mm (L) x 25mm (W) x 15.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: MAGNESIUM. NOTE: For special alloy request by mail.

FIVE STEP (5.0mm – 15.0mm) WEDGE BLOCK (METRIC VERSION) NICKEL Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 5.0mm – 15.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 5.0mm to 15.0mm in 5.0mm, 7.5mm, 10.0mm, 12.5mm and 15.0mm increments. 125mm (L) x 25mm (W) x 15.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: NICKEL. NOTE: For special alloy request by mail.

FIVE STEP (0.25mm – 1.0mm) THIN WEDGE BLOCK (METRIC VERSION) ASME SA516 Gr70 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 0.25mm – 1.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 0.25mm to 1.0mm in 0.25mm, 0.4mm, 0.5mm, 0.75mm and 1.0mm increments. 125mm (L) x 25mm (W) x 1.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: ASME SA516 Gr70. NOTE: For special alloy request by mail.

FIVE STEP (0.25mm – 1.0mm) THIN WEDGE BLOCK (METRIC VERSION) ASME SA517 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 0.25mm – 1.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 0.25mm to 1.0mm in 0.25mm, 0.4mm, 0.5mm, 0.75mm and 1.0mm increments. 125mm (L) x 25mm (W) x 1.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: ASME SA517. NOTE: For special alloy request by mail.

FIVE STEP (0.25mm – 1.0mm) THIN WEDGE BLOCK (METRIC VERSION) ASME SA36 / A36 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 0.25mm – 1.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 0.25mm to 1.0mm in 0.25mm, 0.4mm, 0.5mm, 0.75mm and 1.0mm increments. 125mm (L) x 25mm (W) x 1.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: ASME SA36 / A36. NOTE: For special alloy request by mail.

FIVE STEP (0.25mm – 1.0mm) THIN WEDGE BLOCK (METRIC VERSION) STAINLESS STEEL 304 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 0.25mm – 1.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 0.25mm to 1.0mm in 0.25mm, 0.4mm, 0.5mm, 0.75mm and 1.0mm increments. 125mm (L) x 25mm (W) x 1.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: STAINLESS STEEL 304. NOTE: For special alloy request by mail.

FIVE STEP (0.25mm – 1.0mm) THIN WEDGE BLOCK (METRIC VERSION) STAINLESS STEEL 316 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 0.25mm – 1.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 0.25mm to 1.0mm in 0.25mm, 0.4mm, 0.5mm, 0.75mm and 1.0mm increments. 125mm (L) x 25mm (W) x 1.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: STAINLESS STEEL 316. NOTE: For special alloy request by mail.

FIVE STEP (0.25mm – 1.0mm) THIN WEDGE BLOCK (METRIC VERSION) TITANIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 0.25mm – 1.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 0.25mm to 1.0mm in 0.25mm, 0.4mm, 0.5mm, 0.75mm and 1.0mm increments. 125mm (L) x 25mm (W) x 1.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: TITANIUM. NOTE: For special alloy request by mail.

FIVE STEP (0.25mm – 1.0mm) THIN WEDGE BLOCK (METRIC VERSION) ALUMINUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 0.25mm – 1.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 0.25mm to 1.0mm in 0.25mm, 0.4mm, 0.5mm, 0.75mm and 1.0mm increments. 125mm (L) x 25mm (W) x 1.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: ALUMINUM. NOTE: For special alloy request by mail.

FIVE STEP (0.25mm – 1.0mm) THIN WEDGE BLOCK (METRIC VERSION) COPPER Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 0.25mm – 1.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 0.25mm to 1.0mm in 0.25mm, 0.4mm, 0.5mm, 0.75mm and 1.0mm increments. 125mm (L) x 25mm (W) x 1.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: COPPER. NOTE: For special alloy request by mail.

FIVE STEP (0.25mm – 1.0mm) THIN WEDGE BLOCK (METRIC VERSION) INCONEL 625 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 0.25mm – 1.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 0.25mm to 1.0mm in 0.25mm, 0.4mm, 0.5mm, 0.75mm and 1.0mm increments. 125mm (L) x 25mm (W) x 1.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: INCONEL 625. NOTE: For special alloy request by mail.

FIVE STEP (0.25mm – 1.0mm) THIN WEDGE BLOCK (METRIC VERSION) INCONEL 825 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 0.25mm – 1.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 0.25mm to 1.0mm in 0.25mm, 0.4mm, 0.5mm, 0.75mm and 1.0mm increments. 125mm (L) x 25mm (W) x 1.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: INCONEL 825. NOTE: For special alloy request by mail.

FIVE STEP (0.25mm – 1.0mm) THIN WEDGE BLOCK (METRIC VERSION) MONAL 800 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 0.25mm – 1.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 0.25mm to 1.0mm in 0.25mm, 0.4mm, 0.5mm, 0.75mm and 1.0mm increments. 125mm (L) x 25mm (W) x 1.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: MONAL 800. NOTE: For special alloy request by mail.

FIVE STEP (0.25mm – 1.0mm) THIN WEDGE BLOCK (METRIC VERSION) MAGNESIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 0.25mm – 1.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 0.25mm to 1.0mm in 0.25mm, 0.4mm, 0.5mm, 0.75mm and 1.0mm increments. 125mm (L) x 25mm (W) x 1.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: MAGNESIUM. NOTE: For special alloy request by mail.

FIVE STEP (0.25mm – 1.0mm) THIN WEDGE BLOCK (METRIC VERSION) NICKEL Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 0.25mm – 1.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 0.25mm to 1.0mm in 0.25mm, 0.4mm, 0.5mm, 0.75mm and 1.0mm increments. 125mm (L) x 25mm (W) x 1.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: NICKEL. NOTE: For special alloy request by mail.

FIVE STEP (0.47” – 0.8”) WEDGE BLOCK (INCH VERSION) ASME SA517 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 0.47” – 0.8”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 0.47” to 0.8” in 0.47”, 0.55”, 0.63”, 0.71” and 0.8” increments. 5.0” (L) x 1.0” (W) x 0.8” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 1.0” x 1.0”. MATERIAL: ASME SA517. NOTE: For special alloy request by mail.

FIVE STEP (12.0mm – 20.0mm) WEDGE BLOCK (METRIC VERSION) ASME SA516 Gr70 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 12.0mm – 20.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 12.0mm to 20.0mm in 12.0mm, 14.0mm, 16.0mm, 18.0mm and 20.0mm increments. 125mm (L) x 25mm (W) x 20.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: ASME SA516 Gr70. NOTE: For special alloy request by mail.

FIVE STEP (12.0mm – 20.0mm) WEDGE BLOCK (METRIC VERSION) ASME SA517 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 12.0mm – 20.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 12.0mm to 20.0mm in 12.0mm, 14.0mm, 16.0mm, 18.0mm and 20.0mm increments. 125mm (L) x 25mm (W) x 20.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: ASME SA517. NOTE: For special alloy request by mail.

FIVE STEP (12.0mm – 20.0mm) WEDGE BLOCK (METRIC VERSION) ASME SA36 / A36 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 12.0mm – 20.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 12.0mm to 20.0mm in 12.0mm, 14.0mm, 16.0mm, 18.0mm and 20.0mm increments. 125mm (L) x 25mm (W) x 20.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: ASME SA36 / A36. NOTE: For special alloy request by mail.

FIVE STEP (12.0mm – 20.0mm) WEDGE BLOCK (METRIC VERSION) STAINLESS STEEL 304 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 12.0mm – 20.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 12.0mm to 20.0mm in 12.0mm, 14.0mm, 16.0mm, 18.0mm and 20.0mm increments. 125mm (L) x 25mm (W) x 20.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: STAINLESS STEEL 304. NOTE: For special alloy request by mail.

FIVE STEP (12.0mm – 20.0mm) WEDGE BLOCK (METRIC VERSION) STAINLESS STEEL 316 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 12.0mm – 20.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 12.0mm to 20.0mm in 12.0mm, 14.0mm, 16.0mm, 18.0mm and 20.0mm increments. 125mm (L) x 25mm (W) x 20.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: STAINLESS STEEL 316. NOTE: For special alloy request by mail.

FIVE STEP (12.0mm – 20.0mm) WEDGE BLOCK (METRIC VERSION) TITANIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 12.0mm – 20.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 12.0mm to 20.0mm in 12.0mm, 14.0mm, 16.0mm, 18.0mm and 20.0mm increments. 125mm (L) x 25mm (W) x 20.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: TITANIUM. NOTE: For special alloy request by mail.

FIVE STEP (12.0mm – 20.0mm) WEDGE BLOCK (METRIC VERSION) ALUMINUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 12.0mm – 20.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 12.0mm to 20.0mm in 12.0mm, 14.0mm, 16.0mm, 18.0mm and 20.0mm increments. 125mm (L) x 25mm (W) x 20.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: ALUMINUM. NOTE: For special alloy request by mail.

FIVE STEP (12.0mm – 20.0mm) WEDGE BLOCK (METRIC VERSION) COPPER Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 12.0mm – 20.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 12.0mm to 20.0mm in 12.0mm, 14.0mm, 16.0mm, 18.0mm and 20.0mm increments. 125mm (L) x 25mm (W) x 20.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: COPPER. NOTE: For special alloy request by mail.

FIVE STEP (12.0mm – 20.0mm) WEDGE BLOCK (METRIC VERSION) INCONEL 625 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 12.0mm – 20.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 12.0mm to 20.0mm in 12.0mm, 14.0mm, 16.0mm, 18.0mm and 20.0mm increments. 125mm (L) x 25mm (W) x 20.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: INCONEL 625. NOTE: For special alloy request by mail.

FIVE STEP (12.0mm – 20.0mm) WEDGE BLOCK (METRIC VERSION) INCONEL 825 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 12.0mm – 20.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 12.0mm to 20.0mm in 12.0mm, 14.0mm, 16.0mm, 18.0mm and 20.0mm increments. 125mm (L) x 25mm (W) x 20.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: INCONEL 825. NOTE: For special alloy request by mail.

FIVE STEP (12.0mm – 20.0mm) WEDGE BLOCK (METRIC VERSION) MONAL 800 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 12.0mm – 20.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 12.0mm to 20.0mm in 12.0mm, 14.0mm, 16.0mm, 18.0mm and 20.0mm increments. 125mm (L) x 25mm (W) x 20.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: MONAL 800. NOTE: For special alloy request by mail.

FIVE STEP (12.0mm – 20.0mm) WEDGE BLOCK (METRIC VERSION) MAGNESIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 12.0mm – 20.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 12.0mm to 20.0mm in 12.0mm, 14.0mm, 16.0mm, 18.0mm and 20.0mm increments. 125mm (L) x 25mm (W) x 20.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: MAGNESIUM. NOTE: For special alloy request by mail.

FIVE STEP (12.0mm – 20.0mm) WEDGE BLOCK (METRIC VERSION) NICKEL Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 12.0mm – 20.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 12.0mm to 20.0mm in 12.0mm, 14.0mm, 16.0mm, 18.0mm and 20.0mm increments. 125mm (L) x 25mm (W) x 20.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: NICKEL. NOTE: For special alloy request by mail.

FIVE STEP (6.0mm – 25mm) WEDGE BLOCK (METRIC VERSION) ASME SA516 Gr70 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 6.0mm – 25.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 6.0mm to 25.0mm in 6.0mm, 10.0mm, 15.0mm, 20.0mm and 25.0mm increments. 125mm (L) x 25mm (W) x 25.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: ASME SA516 Gr70. NOTE: For special alloy request by mail.

FIVE STEP (6.0mm – 25mm) WEDGE BLOCK (METRIC VERSION) ASME SA517 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 6.0mm – 25.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 6.0mm to 25.0mm in 6.0mm, 10.0mm, 15.0mm, 20.0mm and 25.0mm increments. 125mm (L) x 25mm (W) x 25.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: ASME SA517. NOTE: For special alloy request by mail.

FIVE STEP (6.0mm – 25mm) WEDGE BLOCK (METRIC VERSION) ASME SA36 / A36 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 6.0mm – 25.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 6.0mm to 25.0mm in 6.0mm, 10.0mm, 15.0mm, 20.0mm and 25.0mm increments. 125mm (L) x 25mm (W) x 25.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: ASME SA36 / A36. NOTE: For special alloy request by mail.

FIVE STEP (6.0mm – 25mm) WEDGE BLOCK (METRIC VERSION) STAINLESS STEEL 304 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 6.0mm – 25.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 6.0mm to 25.0mm in 6.0mm, 10.0mm, 15.0mm, 20.0mm and 25.0mm increments. 125mm (L) x 25mm (W) x 25.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: STAINLESS STEEL 304. NOTE: For special alloy request by mail.

FIVE STEP (6.0mm – 25mm) WEDGE BLOCK (METRIC VERSION) STAINLESS STEEL 316 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 6.0mm – 25.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 6.0mm to 25.0mm in 6.0mm, 10.0mm, 15.0mm, 20.0mm and 25.0mm increments. 125mm (L) x 25mm (W) x 25.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: STAINLESS STEEL 316. NOTE: For special alloy request by mail.

FIVE STEP (6.0mm – 25mm) WEDGE BLOCK (METRIC VERSION) TITANIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 6.0mm – 25.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 6.0mm to 25.0mm in 6.0mm, 10.0mm, 15.0mm, 20.0mm and 25.0mm increments. 125mm (L) x 25mm (W) x 25.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: TITANIUM. NOTE: For special alloy request by mail.

FIVE STEP (6.0mm – 25mm) WEDGE BLOCK (METRIC VERSION) ALUMINUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 6.0mm – 25.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 6.0mm to 25.0mm in 6.0mm, 10.0mm, 15.0mm, 20.0mm and 25.0mm increments. 125mm (L) x 25mm (W) x 25.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: ALUMINUM. NOTE: For special alloy request by mail.

FIVE STEP (6.0mm – 25mm) WEDGE BLOCK (METRIC VERSION) COPPER Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 6.0mm – 25.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 6.0mm to 25.0mm in 6.0mm, 10.0mm, 15.0mm, 20.0mm and 25.0mm increments. 125mm (L) x 25mm (W) x 25.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: COPPER. NOTE: For special alloy request by mail.

FIVE STEP (6.0mm – 25mm) WEDGE BLOCK (METRIC VERSION) INCONEL 625 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 6.0mm – 25.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 6.0mm to 25.0mm in 6.0mm, 10.0mm, 15.0mm, 20.0mm and 25.0mm increments. 125mm (L) x 25mm (W) x 25.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: INCONEL 625. NOTE: For special alloy request by mail.

FIVE STEP (6.0mm – 25mm) WEDGE BLOCK (METRIC VERSION) INCONEL 825 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 6.0mm – 25.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 6.0mm to 25.0mm in 6.0mm, 10.0mm, 15.0mm, 20.0mm and 25.0mm increments. 125mm (L) x 25mm (W) x 25.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: INCONEL 825. NOTE: For special alloy request by mail.

FIVE STEP (6.0mm – 25mm) WEDGE BLOCK (METRIC VERSION) MONAL 800 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 6.0mm – 25.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 6.0mm to 25.0mm in 6.0mm, 10.0mm, 15.0mm, 20.0mm and 25.0mm increments. 125mm (L) x 25mm (W) x 25.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: MONAL 800. NOTE: For special alloy request by mail.

FIVE STEP (6.0mm – 25mm) WEDGE BLOCK (METRIC VERSION) MAGNESIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 6.0mm – 25.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 6.0mm to 25.0mm in 6.0mm, 10.0mm, 15.0mm, 20.0mm and 25.0mm increments. 125mm (L) x 25mm (W) x 25.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: MAGNESIUM. NOTE: For special alloy request by mail.

FIVE STEP (6.0mm – 25mm) WEDGE BLOCK (METRIC VERSION) NICKEL Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 6.0mm – 25.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 6.0mm to 25.0mm in 6.0mm, 10.0mm, 15.0mm, 20.0mm and 25.0mm increments. 125mm (L) x 25mm (W) x 25.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: NICKEL. NOTE: For special alloy request by mail.

FIVE STEP (5.0mm – 25mm) WEDGE BLOCK (METRIC VERSION) ASME SA516 Gr70 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 5.0mm – 25.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 5.0mm to 25.0mm in 5.0mm, 10.0mm, 15.0mm, 20.0mm and 25.0mm increments. 125mm (L) x 25mm (W) x 25.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: ASME SA516 Gr70. NOTE: For special alloy request by mail.

FIVE STEP (5.0mm – 25mm) WEDGE BLOCK (METRIC VERSION) ASME SA517 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 5.0mm – 25.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 5.0mm to 25.0mm in 5.0mm, 10.0mm, 15.0mm, 20.0mm and 25.0mm increments. 125mm (L) x 25mm (W) x 25.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: ASME SA517. NOTE: For special alloy request by mail.

FIVE STEP (5.0mm – 25mm) WEDGE BLOCK (METRIC VERSION) ASME SA36 / A36 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 5.0mm – 25.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 5.0mm to 25.0mm in 5.0mm, 10.0mm, 15.0mm, 20.0mm and 25.0mm increments. 125mm (L) x 25mm (W) x 25.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: ASME SA36 / A36. NOTE: For special alloy request by mail.

FIVE STEP (5.0mm – 25mm) WEDGE BLOCK (METRIC VERSION) STAINLESS STEEL 304 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 5.0mm – 25.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 5.0mm to 25.0mm in 5.0mm, 10.0mm, 15.0mm, 20.0mm and 25.0mm increments. 125mm (L) x 25mm (W) x 25.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: STAINLESS STEEL 304. NOTE: For special alloy request by mail.

FIVE STEP (5.0mm – 25mm) WEDGE BLOCK (METRIC VERSION) STAINLESS STEEL 316 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 5.0mm – 25.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 5.0mm to 25.0mm in 5.0mm, 10.0mm, 15.0mm, 20.0mm and 25.0mm increments. 125mm (L) x 25mm (W) x 25.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: STAINLESS STEEL 316. NOTE: For special alloy request by mail.

FIVE STEP (5.0mm – 25mm) WEDGE BLOCK (METRIC VERSION) TITANIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 5.0mm – 25.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 5.0mm to 25.0mm in 5.0mm, 10.0mm, 15.0mm, 20.0mm and 25.0mm increments. 125mm (L) x 25mm (W) x 25.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: TITANIUM. NOTE: For special alloy request by mail.

FIVE STEP (5.0mm – 25mm) WEDGE BLOCK (METRIC VERSION) ALUMINUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 5.0mm – 25.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 5.0mm to 25.0mm in 5.0mm, 10.0mm, 15.0mm, 20.0mm and 25.0mm increments. 125mm (L) x 25mm (W) x 25.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: ALUMINUM. NOTE: For special alloy request by mail.

FIVE STEP (5.0mm – 25mm) WEDGE BLOCK (METRIC VERSION) COPPER Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 5.0mm – 25.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 5.0mm to 25.0mm in 5.0mm, 10.0mm, 15.0mm, 20.0mm and 25.0mm increments. 125mm (L) x 25mm (W) x 25.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: COPPER. NOTE: For special alloy request by mail.

FIVE STEP (5.0mm – 25mm) WEDGE BLOCK (METRIC VERSION) INCONEL 625 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 5.0mm – 25.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 5.0mm to 25.0mm in 5.0mm, 10.0mm, 15.0mm, 20.0mm and 25.0mm increments. 125mm (L) x 25mm (W) x 25.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: INCONEL 625. NOTE: For special alloy request by mail.

FIVE STEP (5.0mm – 25mm) WEDGE BLOCK (METRIC VERSION) INCONEL 825 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 5.0mm – 25.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 5.0mm to 25.0mm in 5.0mm, 10.0mm, 15.0mm, 20.0mm and 25.0mm increments. 125mm (L) x 25mm (W) x 25.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: INCONEL 825. NOTE: For special alloy request by mail.

FIVE STEP (5.0mm – 25mm) WEDGE BLOCK (METRIC VERSION) MONAL 800 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 5.0mm – 25.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 5.0mm to 25.0mm in 5.0mm, 10.0mm, 15.0mm, 20.0mm and 25.0mm increments. 125mm (L) x 25mm (W) x 25.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: MONAL 800. NOTE: For special alloy request by mail.

FIVE STEP (5.0mm – 25mm) WEDGE BLOCK (METRIC VERSION) MAGNESIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 5.0mm – 25.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 5.0mm to 25.0mm in 5.0mm, 10.0mm, 15.0mm, 20.0mm and 25.0mm increments. 125mm (L) x 25mm (W) x 25.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: MAGNESIUM. NOTE: For special alloy request by mail.

FIVE STEP (5.0mm – 25mm) WEDGE BLOCK (METRIC VERSION) NICKEL Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 5.0mm – 25.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 5.0mm to 25.0mm in 5.0mm, 10.0mm, 15.0mm, 20.0mm and 25.0mm increments. 125mm (L) x 25mm (W) x 25.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: NICKEL. NOTE: For special alloy request by mail.

FIVE STEP (15.0mm – 25mm) WEDGE BLOCK (METRIC VERSION) ASME SA516 Gr70 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 15.0mm – 25.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 5.0mm to 25.0mm in 15.0mm, 17.5mm, 20.0mm, 22.5mm and 25.0mm increments. 125mm (L) x 25mm (W) x 25.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: ASME SA516 Gr70. NOTE: For special alloy request by mail.

FIVE STEP (15.0mm – 25mm) WEDGE BLOCK (METRIC VERSION) ASME SA517 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 15.0mm – 25.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 5.0mm to 25.0mm in 15.0mm, 17.5mm, 20.0mm, 22.5mm and 25.0mm increments. 125mm (L) x 25mm (W) x 25.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: ASME SA517. NOTE: For special alloy request by mail.

FIVE STEP (15.0mm – 25mm) WEDGE BLOCK (METRIC VERSION) ASME SA36 / A36 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 15.0mm – 25.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 5.0mm to 25.0mm in 15.0mm, 17.5mm, 20.0mm, 22.5mm and 25.0mm increments. 125mm (L) x 25mm (W) x 25.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: ASME SA36 / A36. NOTE: For special alloy request by mail.

FIVE STEP (15.0mm – 25mm) WEDGE BLOCK (METRIC VERSION) STAINLESS STEEL 304 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 15.0mm – 25.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 5.0mm to 25.0mm in 15.0mm, 17.5mm, 20.0mm, 22.5mm and 25.0mm increments. 125mm (L) x 25mm (W) x 25.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: STAINLESS STEEL 304. NOTE: For special alloy request by mail.

FIVE STEP (15.0mm – 25mm) WEDGE BLOCK (METRIC VERSION) STAINLESS STEEL 316 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 15.0mm – 25.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 5.0mm to 25.0mm in 15.0mm, 17.5mm, 20.0mm, 22.5mm and 25.0mm increments. 125mm (L) x 25mm (W) x 25.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: STAINLESS STEEL 316. NOTE: For special alloy request by mail.

FIVE STEP (15.0mm – 25mm) WEDGE BLOCK (METRIC VERSION) TITANIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 15.0mm – 25.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 5.0mm to 25.0mm in 15.0mm, 17.5mm, 20.0mm, 22.5mm and 25.0mm increments. 125mm (L) x 25mm (W) x 25.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: TITANIUM. NOTE: For special alloy request by mail.

FIVE STEP (15.0mm – 25mm) WEDGE BLOCK (METRIC VERSION) ALUMINUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 15.0mm – 25.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 5.0mm to 25.0mm in 15.0mm, 17.5mm, 20.0mm, 22.5mm and 25.0mm increments. 125mm (L) x 25mm (W) x 25.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: ALUMINUM. NOTE: For special alloy request by mail.

FIVE STEP (15.0mm – 25mm) WEDGE BLOCK (METRIC VERSION) COPPER Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 15.0mm – 25.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 5.0mm to 25.0mm in 15.0mm, 17.5mm, 20.0mm, 22.5mm and 25.0mm increments. 125mm (L) x 25mm (W) x 25.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: COPPER. NOTE: For special alloy request by mail.

FIVE STEP (15.0mm – 25mm) WEDGE BLOCK (METRIC VERSION) INCONEL 625 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 15.0mm – 25.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 5.0mm to 25.0mm in 15.0mm, 17.5mm, 20.0mm, 22.5mm and 25.0mm increments. 125mm (L) x 25mm (W) x 25.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: INCONEL 625. NOTE: For special alloy request by mail.

FIVE STEP (15.0mm – 25mm) WEDGE BLOCK (METRIC VERSION) INCONEL 825 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 15.0mm – 25.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 5.0mm to 25.0mm in 15.0mm, 17.5mm, 20.0mm, 22.5mm and 25.0mm increments. 125mm (L) x 25mm (W) x 25.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: INCONEL 825. NOTE: For special alloy request by mail.

FIVE STEP (15.0mm – 25mm) WEDGE BLOCK (METRIC VERSION) MONAL 800 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 15.0mm – 25.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 5.0mm to 25.0mm in 15.0mm, 17.5mm, 20.0mm, 22.5mm and 25.0mm increments. 125mm (L) x 25mm (W) x 25.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: MONAL 800. NOTE: For special alloy request by mail.

FIVE STEP (15.0mm – 25mm) WEDGE BLOCK (METRIC VERSION) MAGNESIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 15.0mm – 25.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 5.0mm to 25.0mm in 15.0mm, 17.5mm, 20.0mm, 22.5mm and 25.0mm increments. 125mm (L) x 25mm (W) x 25.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: MAGNESIUM. NOTE: For special alloy request by mail.

FIVE STEP (15.0mm – 25mm) WEDGE BLOCK (METRIC VERSION) NICKEL Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 15.0mm – 25.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 5.0mm to 25.0mm in 15.0mm, 17.5mm, 20.0mm, 22.5mm and 25.0mm increments. 125mm (L) x 25mm (W) x 25.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: NICKEL. NOTE: For special alloy request by mail.

FIVE STEP (2.5mm – 3.5mm) WEDGE BLOCK (METRIC VERSION) ASME SA516 Gr70 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 2.5mm – 3.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 2.5mm to 3.5mm in 2.5mm, 2.8mm, 3.0mm, 3.2mm and 3.5mm increments. 125mm (L) x 25mm (W) x 3.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: ASME SA516 Gr70. NOTE: For special alloy request by mail.

FIVE STEP (2.5mm – 3.5mm) WEDGE BLOCK (METRIC VERSION) ASME SA517 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 2.5mm – 3.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 2.5mm to 3.5mm in 2.5mm, 2.8mm, 3.0mm, 3.2mm and 3.5mm increments. 125mm (L) x 25mm (W) x 3.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: ASME SA517. NOTE: For special alloy request by mail.

FIVE STEP (2.5mm – 3.5mm) WEDGE BLOCK (METRIC VERSION) ASME SA36 / A36 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 2.5mm – 3.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 2.5mm to 3.5mm in 2.5mm, 2.8mm, 3.0mm, 3.2mm and 3.5mm increments. 125mm (L) x 25mm (W) x 3.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: ASME SA36 / A36. NOTE: For special alloy request by mail.

FIVE STEP (2.5mm – 3.5mm) WEDGE BLOCK (METRIC VERSION) STAINLESS STEEL 304 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 2.5mm – 3.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 2.5mm to 3.5mm in 2.5mm, 2.8mm, 3.0mm, 3.2mm and 3.5mm increments. 125mm (L) x 25mm (W) x 3.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: STAINLESS STEEL 304. NOTE: For special alloy request by mail.

FIVE STEP (2.5mm – 3.5mm) WEDGE BLOCK (METRIC VERSION) STAINLESS STEEL 316 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 2.5mm – 3.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 2.5mm to 3.5mm in 2.5mm, 2.8mm, 3.0mm, 3.2mm and 3.5mm increments. 125mm (L) x 25mm (W) x 3.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: STAINLESS STEEL 316. NOTE: For special alloy request by mail.

FIVE STEP (2.5mm – 3.5mm) WEDGE BLOCK (METRIC VERSION) TITANIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 2.5mm – 3.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 2.5mm to 3.5mm in 2.5mm, 2.8mm, 3.0mm, 3.2mm and 3.5mm increments. 125mm (L) x 25mm (W) x 3.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: TITANIUM. NOTE: For special alloy request by mail.

FIVE STEP (2.5mm – 3.5mm) WEDGE BLOCK (METRIC VERSION) ALUMINUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 2.5mm – 3.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 2.5mm to 3.5mm in 2.5mm, 2.8mm, 3.0mm, 3.2mm and 3.5mm increments. 125mm (L) x 25mm (W) x 3.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: ALUMINUM. NOTE: For special alloy request by mail.

FIVE STEP (2.5mm – 3.5mm) WEDGE BLOCK (METRIC VERSION) COPPER Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 2.5mm – 3.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 2.5mm to 3.5mm in 2.5mm, 2.8mm, 3.0mm, 3.2mm and 3.5mm increments. 125mm (L) x 25mm (W) x 3.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: COPPER. NOTE: For special alloy request by mail.

FIVE STEP (2.5mm – 3.5mm) WEDGE BLOCK (METRIC VERSION) INCONEL 625 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 2.5mm – 3.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 2.5mm to 3.5mm in 2.5mm, 2.8mm, 3.0mm, 3.2mm and 3.5mm increments. 125mm (L) x 25mm (W) x 3.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: INCONEL 625. NOTE: For special alloy request by mail.

FIVE STEP (2.5mm – 3.5mm) WEDGE BLOCK (METRIC VERSION) INCONEL 825 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 2.5mm – 3.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 2.5mm to 3.5mm in 2.5mm, 2.8mm, 3.0mm, 3.2mm and 3.5mm increments. 125mm (L) x 25mm (W) x 3.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: INCONEL 825. NOTE: For special alloy request by mail.

FIVE STEP (2.5mm – 3.5mm) WEDGE BLOCK (METRIC VERSION) MONAL 800 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 2.5mm – 3.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 2.5mm to 3.5mm in 2.5mm, 2.8mm, 3.0mm, 3.2mm and 3.5mm increments. 125mm (L) x 25mm (W) x 3.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: MONAL 800. NOTE: For special alloy request by mail.

FIVE STEP (2.5mm – 3.5mm) WEDGE BLOCK (METRIC VERSION) MAGNESIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 2.5mm – 3.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 2.5mm to 3.5mm in 2.5mm, 2.8mm, 3.0mm, 3.2mm and 3.5mm increments. 125mm (L) x 25mm (W) x 3.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: MAGNESIUM. NOTE: For special alloy request by mail.

FIVE STEP (2.5mm – 3.5mm) WEDGE BLOCK (METRIC VERSION) NICKEL Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 2.5mm – 3.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 2.5mm to 3.5mm in 2.5mm, 2.8mm, 3.0mm, 3.2mm and 3.5mm increments. 125mm (L) x 25mm (W) x 3.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: NICKEL. NOTE: For special alloy request by mail.

FIVE STEP (6.5mm – 30.0mm) WEDGE BLOCK (METRIC VERSION) ASME SA516 Gr70 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 6.5mm – 30.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 6.5mm to 30.0mm in 6.5mm, 12.5mm, 19.0mm, 25.0mm and 30.0mm increments. 125mm (L) x 25mm (W) x 30.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: ASME SA516 Gr70. NOTE: For special alloy request by mail.

FIVE STEP (6.5mm – 30.0mm) WEDGE BLOCK (METRIC VERSION) ASME SA517 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 6.5mm – 30.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 6.5mm to 30.0mm in 6.5mm, 12.5mm, 19.0mm, 25.0mm and 30.0mm increments. 125mm (L) x 25mm (W) x 30.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: ASME SA517. NOTE: For special alloy request by mail.

FIVE STEP (6.5mm – 30.0mm) WEDGE BLOCK (METRIC VERSION) ASME SA36 / A36 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 6.5mm – 30.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 6.5mm to 30.0mm in 6.5mm, 12.5mm, 19.0mm, 25.0mm and 30.0mm increments. 125mm (L) x 25mm (W) x 30.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: ASME SA36 / A36. NOTE: For special alloy request by mail.

FIVE STEP (6.5mm – 30.0mm) WEDGE BLOCK (METRIC VERSION) STAINLESS STEEL 304 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 6.5mm – 30.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 6.5mm to 30.0mm in 6.5mm, 12.5mm, 19.0mm, 25.0mm and 30.0mm increments. 125mm (L) x 25mm (W) x 30.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: STAINLESS STEEL 304. NOTE: For special alloy request by mail.

FIVE STEP (6.5mm – 30.0mm) WEDGE BLOCK (METRIC VERSION) STAINLESS STEEL 316 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 6.5mm – 30.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 6.5mm to 30.0mm in 6.5mm, 12.5mm, 19.0mm, 25.0mm and 30.0mm increments. 125mm (L) x 25mm (W) x 30.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: STAINLESS STEEL 316. NOTE: For special alloy request by mail.

FIVE STEP (6.5mm – 30.0mm) WEDGE BLOCK (METRIC VERSION) TITANIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 6.5mm – 30.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 6.5mm to 30.0mm in 6.5mm, 12.5mm, 19.0mm, 25.0mm and 30.0mm increments. 125mm (L) x 25mm (W) x 30.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: TITANIUM. NOTE: For special alloy request by mail.

FIVE STEP (6.5mm – 30.0mm) WEDGE BLOCK (METRIC VERSION) ALUMINUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 6.5mm – 30.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 6.5mm to 30.0mm in 6.5mm, 12.5mm, 19.0mm, 25.0mm and 30.0mm increments. 125mm (L) x 25mm (W) x 30.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: ALUMINUM. NOTE: For special alloy request by mail.

FIVE STEP (6.5mm – 30.0mm) WEDGE BLOCK (METRIC VERSION) COPPER Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 6.5mm – 30.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 6.5mm to 30.0mm in 6.5mm, 12.5mm, 19.0mm, 25.0mm and 30.0mm increments. 125mm (L) x 25mm (W) x 30.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: COPPER. NOTE: For special alloy request by mail.

FIVE STEP (6.5mm – 30.0mm) WEDGE BLOCK (METRIC VERSION) INCONEL 625 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 6.5mm – 30.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 6.5mm to 30.0mm in 6.5mm, 12.5mm, 19.0mm, 25.0mm and 30.0mm increments. 125mm (L) x 25mm (W) x 30.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: INCONEL 625. NOTE: For special alloy request by mail.

FIVE STEP (6.5mm – 30.0mm) WEDGE BLOCK (METRIC VERSION) INCONEL 825 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 6.5mm – 30.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 6.5mm to 30.0mm in 6.5mm, 12.5mm, 19.0mm, 25.0mm and 30.0mm increments. 125mm (L) x 25mm (W) x 30.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: INCONEL 825. NOTE: For special alloy request by mail.

FIVE STEP (6.5mm – 30.0mm) WEDGE BLOCK (METRIC VERSION) MONAL 800 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 6.5mm – 30.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 6.5mm to 30.0mm in 6.5mm, 12.5mm, 19.0mm, 25.0mm and 30.0mm increments. 125mm (L) x 25mm (W) x 30.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: MONAL 800. NOTE: For special alloy request by mail.

FIVE STEP (6.5mm – 30.0mm) WEDGE BLOCK (METRIC VERSION) MAGNESIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 6.5mm – 30.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 6.5mm to 30.0mm in 6.5mm, 12.5mm, 19.0mm, 25.0mm and 30.0mm increments. 125mm (L) x 25mm (W) x 30.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: MAGNESIUM. NOTE: For special alloy request by mail.

FIVE STEP (6.5mm – 30.0mm) WEDGE BLOCK (METRIC VERSION) NICKEL Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 6.5mm – 30.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 6.5mm to 30.0mm in 6.5mm, 12.5mm, 19.0mm, 25.0mm and 30.0mm increments. 125mm (L) x 25mm (W) x 30.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: NICKEL. NOTE: For special alloy request by mail.

FIVE STEP (28.0mm – 38.0mm) WEDGE BLOCK (METRIC VERSION) ASME SA516 Gr70 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 28.0mm – 38.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 28.0mm to 38.0mm in 28.0mm, 30.0mm, 33.0mm, 35.0mm and 38.0mm increments. 125mm (L) x 25mm (W) x 38.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: ASME SA516 Gr70. NOTE: For special alloy request by mail.

FIVE STEP (28.0mm – 38.0mm) WEDGE BLOCK (METRIC VERSION) ASME SA517 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 28.0mm – 38.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 28.0mm to 38.0mm in 28.0mm, 30.0mm, 33.0mm, 35.0mm and 38.0mm increments. 125mm (L) x 25mm (W) x 38.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: ASME SA517. NOTE: For special alloy request by mail.

FIVE STEP (28.0mm – 38.0mm) WEDGE BLOCK (METRIC VERSION) ASME SA36 / A36 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 28.0mm – 38.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 28.0mm to 38.0mm in 28.0mm, 30.0mm, 33.0mm, 35.0mm and 38.0mm increments. 125mm (L) x 25mm (W) x 38.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: ASME SA36 / A36. NOTE: For special alloy request by mail.

FIVE STEP (28.0mm – 38.0mm) WEDGE BLOCK (METRIC VERSION) STAINLESS STEEL 304 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 28.0mm – 38.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 28.0mm to 38.0mm in 28.0mm, 30.0mm, 33.0mm, 35.0mm and 38.0mm increments. 125mm (L) x 25mm (W) x 38.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: STAINLESS STEEL 304. NOTE: For special alloy request by mail.

FIVE STEP (28.0mm – 38.0mm) WEDGE BLOCK (METRIC VERSION) STAINLESS STEEL 316 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 28.0mm – 38.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 28.0mm to 38.0mm in 28.0mm, 30.0mm, 33.0mm, 35.0mm and 38.0mm increments. 125mm (L) x 25mm (W) x 38.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: STAINLESS STEEL 316. NOTE: For special alloy request by mail.

FIVE STEP (28.0mm – 38.0mm) WEDGE BLOCK (METRIC VERSION) TITANIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 28.0mm – 38.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 28.0mm to 38.0mm in 28.0mm, 30.0mm, 33.0mm, 35.0mm and 38.0mm increments. 125mm (L) x 25mm (W) x 38.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: TITANIUM. NOTE: For special alloy request by mail.

FIVE STEP (28.0mm – 38.0mm) WEDGE BLOCK (METRIC VERSION) ALUMINUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 28.0mm – 38.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 28.0mm to 38.0mm in 28.0mm, 30.0mm, 33.0mm, 35.0mm and 38.0mm increments. 125mm (L) x 25mm (W) x 38.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: ALUMINUM. NOTE: For special alloy request by mail.

FIVE STEP (28.0mm – 38.0mm) WEDGE BLOCK (METRIC VERSION) COPPER Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 28.0mm – 38.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 28.0mm to 38.0mm in 28.0mm, 30.0mm, 33.0mm, 35.0mm and 38.0mm increments. 125mm (L) x 25mm (W) x 38.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: COPPER. NOTE: For special alloy request by mail.

FIVE STEP (28.0mm – 38.0mm) WEDGE BLOCK (METRIC VERSION) INCONEL 625 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 28.0mm – 38.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 28.0mm to 38.0mm in 28.0mm, 30.0mm, 33.0mm, 35.0mm and 38.0mm increments. 125mm (L) x 25mm (W) x 38.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: INCONEL 625. NOTE: For special alloy request by mail.

FIVE STEP (28.0mm – 38.0mm) WEDGE BLOCK (METRIC VERSION) INCONEL 825 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 28.0mm – 38.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 28.0mm to 38.0mm in 28.0mm, 30.0mm, 33.0mm, 35.0mm and 38.0mm increments. 125mm (L) x 25mm (W) x 38.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: INCONEL 825. NOTE: For special alloy request by mail.

FIVE STEP (28.0mm – 38.0mm) WEDGE BLOCK (METRIC VERSION) MONAL 800 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 28.0mm – 38.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 28.0mm to 38.0mm in 28.0mm, 30.0mm, 33.0mm, 35.0mm and 38.0mm increments. 125mm (L) x 25mm (W) x 38.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: MONAL 800. NOTE: For special alloy request by mail.

FIVE STEP (28.0mm – 38.0mm) WEDGE BLOCK (METRIC VERSION) MAGNESIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 28.0mm – 38.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 28.0mm to 38.0mm in 28.0mm, 30.0mm, 33.0mm, 35.0mm and 38.0mm increments. 125mm (L) x 25mm (W) x 38.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: MAGNESIUM. NOTE: For special alloy request by mail.

FIVE STEP (28.0mm – 38.0mm) WEDGE BLOCK (METRIC VERSION) NICKEL Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 28.0mm – 38.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 28.0mm to 38.0mm in 28.0mm, 30.0mm, 33.0mm, 35.0mm and 38.0mm increments. 125mm (L) x 25mm (W) x 38.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: NICKEL. NOTE: For special alloy request by mail.

FIVE STEP (1.25mm – 6.25mm) WEDGE BLOCK (METRIC VERSION) ASME SA516 Gr70 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 1.25mm – 6.25mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 1.25mm to 6.25mm in 1.25mm, 2.5mm, 3.5mm, 5.0mm and 6.25mm increments. 125mm (L) x 25mm (W) x 6.25mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: ASME SA516 Gr70. NOTE: For special alloy request by mail.

FIVE STEP (1.25mm – 6.25mm) WEDGE BLOCK (METRIC VERSION) ASME SA517 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 1.25mm – 6.25mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 1.25mm to 6.25mm in 1.25mm, 2.5mm, 3.5mm, 5.0mm and 6.25mm increments. 125mm (L) x 25mm (W) x 6.25mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: ASME SA517. NOTE: For special alloy request by mail.

FIVE STEP (1.25mm – 6.25mm) WEDGE BLOCK (METRIC VERSION) ASME SA36 / A36 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 1.25mm – 6.25mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 1.25mm to 6.25mm in 1.25mm, 2.5mm, 3.5mm, 5.0mm and 6.25mm increments. 125mm (L) x 25mm (W) x 6.25mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: ASME SA36 / A36. NOTE: For special alloy request by mail.

FIVE STEP (1.25mm – 6.25mm) WEDGE BLOCK (METRIC VERSION) STAINLESS STEEL 304 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 1.25mm – 6.25mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 1.25mm to 6.25mm in 1.25mm, 2.5mm, 3.5mm, 5.0mm and 6.25mm increments. 125mm (L) x 25mm (W) x 6.25mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: STAINLESS STEEL 304. NOTE: For special alloy request by mail.

FIVE STEP (1.25mm – 6.25mm) WEDGE BLOCK (METRIC VERSION) STAINLESS STEEL 316 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 1.25mm – 6.25mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 1.25mm to 6.25mm in 1.25mm, 2.5mm, 3.5mm, 5.0mm and 6.25mm increments. 125mm (L) x 25mm (W) x 6.25mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: STAINLESS STEEL 316. NOTE: For special alloy request by mail.

FIVE STEP (1.25mm – 6.25mm) WEDGE BLOCK (METRIC VERSION) TITANIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 1.25mm – 6.25mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 1.25mm to 6.25mm in 1.25mm, 2.5mm, 3.5mm, 5.0mm and 6.25mm increments. 125mm (L) x 25mm (W) x 6.25mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: TITANIUM. NOTE: For special alloy request by mail.

FIVE STEP (1.25mm – 6.25mm) WEDGE BLOCK (METRIC VERSION) ALUMINUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 1.25mm – 6.25mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 1.25mm to 6.25mm in 1.25mm, 2.5mm, 3.5mm, 5.0mm and 6.25mm increments. 125mm (L) x 25mm (W) x 6.25mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: ALUMINUM. NOTE: For special alloy request by mail.

FIVE STEP (1.25mm – 6.25mm) WEDGE BLOCK (METRIC VERSION) COPPER Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 1.25mm – 6.25mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 1.25mm to 6.25mm in 1.25mm, 2.5mm, 3.5mm, 5.0mm and 6.25mm increments. 125mm (L) x 25mm (W) x 6.25mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: COPPER. NOTE: For special alloy request by mail.

FIVE STEP (1.25mm – 6.25mm) WEDGE BLOCK (METRIC VERSION) INCONEL 625 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 1.25mm – 6.25mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 1.25mm to 6.25mm in 1.25mm, 2.5mm, 3.5mm, 5.0mm and 6.25mm increments. 125mm (L) x 25mm (W) x 6.25mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: INCONEL 625. NOTE: For special alloy request by mail.

FIVE STEP (1.25mm – 6.25mm) WEDGE BLOCK (METRIC VERSION) INCONEL 825 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 1.25mm – 6.25mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 1.25mm to 6.25mm in 1.25mm, 2.5mm, 3.5mm, 5.0mm and 6.25mm increments. 125mm (L) x 25mm (W) x 6.25mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: INCONEL 825. NOTE: For special alloy request by mail.

FIVE STEP (1.25mm – 6.25mm) WEDGE BLOCK (METRIC VERSION) MONAL 800 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 1.25mm – 6.25mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 1.25mm to 6.25mm in 1.25mm, 2.5mm, 3.5mm, 5.0mm and 6.25mm increments. 125mm (L) x 25mm (W) x 6.25mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: MONAL 800. NOTE: For special alloy request by mail.

FIVE STEP (1.25mm – 6.25mm) WEDGE BLOCK (METRIC VERSION) MAGNESIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 1.25mm – 6.25mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 1.25mm to 6.25mm in 1.25mm, 2.5mm, 3.5mm, 5.0mm and 6.25mm increments. 125mm (L) x 25mm (W) x 6.25mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: MAGNESIUM. NOTE: For special alloy request by mail.

FIVE STEP (1.25mm – 6.25mm) WEDGE BLOCK (METRIC VERSION) NICKEL Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 1.25mm – 6.25mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 1.25mm to 6.25mm in 1.25mm, 2.5mm, 3.5mm, 5.0mm and 6.25mm increments. 125mm (L) x 25mm (W) x 6.25mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: NICKEL. NOTE: For special alloy request by mail.

FIVE STEP (5.0mm – 7.0mm) WEDGE BLOCK (METRIC VERSION) ASME SA516 Gr70 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 5.0mm – 7.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 5.0mm to 7.0mm in 5.0mm, 5.5mm, 6.0mm, 6.5mm and 7.0mm increments. 125mm (L) x 25mm (W) x 7.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: ASME SA516 Gr70. NOTE: For special alloy request by mail.

FIVE STEP (5.0mm – 7.0mm) WEDGE BLOCK (METRIC VERSION) ASME SA517 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 5.0mm – 7.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 5.0mm to 7.0mm in 5.0mm, 5.5mm, 6.0mm, 6.5mm and 7.0mm increments. 125mm (L) x 25mm (W) x 7.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: ASME SA517. NOTE: For special alloy request by mail.

FIVE STEP (5.0mm – 7.0mm) WEDGE BLOCK (METRIC VERSION) ASME SA36 / A36 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 5.0mm – 7.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 5.0mm to 7.0mm in 5.0mm, 5.5mm, 6.0mm, 6.5mm and 7.0mm increments. 125mm (L) x 25mm (W) x 7.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: ASME SA36 / A36. NOTE: For special alloy request by mail.

FIVE STEP (5.0mm – 7.0mm) WEDGE BLOCK (METRIC VERSION) STAINLESS STEEL 304 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 5.0mm – 7.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 5.0mm to 7.0mm in 5.0mm, 5.5mm, 6.0mm, 6.5mm and 7.0mm increments. 125mm (L) x 25mm (W) x 7.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: STAINLESS STEEL 304. NOTE: For special alloy request by mail.

FIVE STEP (5.0mm – 7.0mm) WEDGE BLOCK (METRIC VERSION) STAINLESS STEEL 316 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 5.0mm – 7.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 5.0mm to 7.0mm in 5.0mm, 5.5mm, 6.0mm, 6.5mm and 7.0mm increments. 125mm (L) x 25mm (W) x 7.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: STAINLESS STEEL 316. NOTE: For special alloy request by mail.

FIVE STEP (5.0mm – 7.0mm) WEDGE BLOCK (METRIC VERSION) TITANIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 5.0mm – 7.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 5.0mm to 7.0mm in 5.0mm, 5.5mm, 6.0mm, 6.5mm and 7.0mm increments. 125mm (L) x 25mm (W) x 7.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: TITANIUM. NOTE: For special alloy request by mail.

FIVE STEP (5.0mm – 7.0mm) WEDGE BLOCK (METRIC VERSION) ALUMINUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 5.0mm – 7.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 5.0mm to 7.0mm in 5.0mm, 5.5mm, 6.0mm, 6.5mm and 7.0mm increments. 125mm (L) x 25mm (W) x 7.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: ALUMINUM. NOTE: For special alloy request by mail.

FIVE STEP (5.0mm – 7.0mm) WEDGE BLOCK (METRIC VERSION) COPPER Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 5.0mm – 7.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 5.0mm to 7.0mm in 5.0mm, 5.5mm, 6.0mm, 6.5mm and 7.0mm increments. 125mm (L) x 25mm (W) x 7.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: COPPER. NOTE: For special alloy request by mail.

FIVE STEP (5.0mm – 7.0mm) WEDGE BLOCK (METRIC VERSION) INCONEL 625 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 5.0mm – 7.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 5.0mm to 7.0mm in 5.0mm, 5.5mm, 6.0mm, 6.5mm and 7.0mm increments. 125mm (L) x 25mm (W) x 7.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: INCONEL 625. NOTE: For special alloy request by mail.

FIVE STEP (5.0mm – 7.0mm) WEDGE BLOCK (METRIC VERSION) INCONEL 825 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 5.0mm – 7.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 5.0mm to 7.0mm in 5.0mm, 5.5mm, 6.0mm, 6.5mm and 7.0mm increments. 125mm (L) x 25mm (W) x 7.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: INCONEL 825. NOTE: For special alloy request by mail.

FIVE STEP (5.0mm – 7.0mm) WEDGE BLOCK (METRIC VERSION) MONAL 800 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 5.0mm – 7.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 5.0mm to 7.0mm in 5.0mm, 5.5mm, 6.0mm, 6.5mm and 7.0mm increments. 125mm (L) x 25mm (W) x 7.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: MONAL 800. NOTE: For special alloy request by mail.

FIVE STEP (5.0mm – 7.0mm) WEDGE BLOCK (METRIC VERSION) MAGNESIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 5.0mm – 7.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 5.0mm to 7.0mm in 5.0mm, 5.5mm, 6.0mm, 6.5mm and 7.0mm increments. 125mm (L) x 25mm (W) x 7.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: MAGNESIUM. NOTE: For special alloy request by mail.

FIVE STEP (5.0mm – 7.0mm) WEDGE BLOCK (METRIC VERSION) NICKEL Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 5.0mm – 7.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 5.0mm to 7.0mm in 5.0mm, 5.5mm, 6.0mm, 6.5mm and 7.0mm increments. 125mm (L) x 25mm (W) x 7.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: NICKEL. NOTE: For special alloy request by mail.

FIVE STEP (0.3” – 0.38”) WEDGE BLOCK (INCH VERSION) ASME SA36 / A36 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 0.3” – 0.38”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 0.3” to 0.38” in 0.3”, 0.32”, 0.34”, 0.36” and 0.38” increments. 5.0” (L) x 1.0” (W) x 0.38” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 1.0” x 1.0”. MATERIAL: ASME SA36 / A36. NOTE: For special alloy request by mail.

FIVE STEP (7.5mm – 9.5mm) WEDGE BLOCK (METRIC VERSION) ASME SA516 Gr70 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 7.5mm – 9.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 7.5mm to 9.5mm in 7.5mm, 8.0mm, 8.5mm, 9.0mm and 9.5mm increments. 125mm (L) x 25mm (W) x 9.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: ASME SA516 Gr70. NOTE: For special alloy request by mail.

FIVE STEP (7.5mm – 9.5mm) WEDGE BLOCK (METRIC VERSION) ASME SA517 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 7.5mm – 9.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 7.5mm to 9.5mm in 7.5mm, 8.0mm, 8.5mm, 9.0mm and 9.5mm increments. 125mm (L) x 25mm (W) x 9.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: ASME SA517. NOTE: For special alloy request by mail.

FIVE STEP (7.5mm – 9.5mm) WEDGE BLOCK (METRIC VERSION) ASME SA36 / A36 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 7.5mm – 9.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 7.5mm to 9.5mm in 7.5mm, 8.0mm, 8.5mm, 9.0mm and 9.5mm increments. 125mm (L) x 25mm (W) x 9.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: ASME SA36 / A36. NOTE: For special alloy request by mail.

FIVE STEP (7.5mm – 9.5mm) WEDGE BLOCK (METRIC VERSION) STAINLESS STEEL 304 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 7.5mm – 9.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 7.5mm to 9.5mm in 7.5mm, 8.0mm, 8.5mm, 9.0mm and 9.5mm increments. 125mm (L) x 25mm (W) x 9.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: STAINLESS STEEL 304. NOTE: For special alloy request by mail.

FIVE STEP (7.5mm – 9.5mm) WEDGE BLOCK (METRIC VERSION) STAINLESS STEEL 316 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 7.5mm – 9.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 7.5mm to 9.5mm in 7.5mm, 8.0mm, 8.5mm, 9.0mm and 9.5mm increments. 125mm (L) x 25mm (W) x 9.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: STAINLESS STEEL 316. NOTE: For special alloy request by mail.

FIVE STEP (7.5mm – 9.5mm) WEDGE BLOCK (METRIC VERSION) TITANIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 7.5mm – 9.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 7.5mm to 9.5mm in 7.5mm, 8.0mm, 8.5mm, 9.0mm and 9.5mm increments. 125mm (L) x 25mm (W) x 9.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: TITANIUM. NOTE: For special alloy request by mail.

FIVE STEP (7.5mm – 9.5mm) WEDGE BLOCK (METRIC VERSION) ALUMINUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 7.5mm – 9.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 7.5mm to 9.5mm in 7.5mm, 8.0mm, 8.5mm, 9.0mm and 9.5mm increments. 125mm (L) x 25mm (W) x 9.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: ALUMINUM. NOTE: For special alloy request by mail.

FIVE STEP (7.5mm – 9.5mm) WEDGE BLOCK (METRIC VERSION) COPPER Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 7.5mm – 9.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 7.5mm to 9.5mm in 7.5mm, 8.0mm, 8.5mm, 9.0mm and 9.5mm increments. 125mm (L) x 25mm (W) x 9.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: COPPER. NOTE: For special alloy request by mail.

FIVE STEP (7.5mm – 9.5mm) WEDGE BLOCK (METRIC VERSION) INCONEL 625 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 7.5mm – 9.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 7.5mm to 9.5mm in 7.5mm, 8.0mm, 8.5mm, 9.0mm and 9.5mm increments. 125mm (L) x 25mm (W) x 9.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: INCONEL 625. NOTE: For special alloy request by mail.

FIVE STEP (7.5mm – 9.5mm) WEDGE BLOCK (METRIC VERSION) INCONEL 825 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 7.5mm – 9.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 7.5mm to 9.5mm in 7.5mm, 8.0mm, 8.5mm, 9.0mm and 9.5mm increments. 125mm (L) x 25mm (W) x 9.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: INCONEL 825. NOTE: For special alloy request by mail.

FIVE STEP (7.5mm – 9.5mm) WEDGE BLOCK (METRIC VERSION) MONAL 800 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 7.5mm – 9.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 7.5mm to 9.5mm in 7.5mm, 8.0mm, 8.5mm, 9.0mm and 9.5mm increments. 125mm (L) x 25mm (W) x 9.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: MONAL 800. NOTE: For special alloy request by mail.

FIVE STEP (7.5mm – 9.5mm) WEDGE BLOCK (METRIC VERSION) MAGNESIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 7.5mm – 9.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 7.5mm to 9.5mm in 7.5mm, 8.0mm, 8.5mm, 9.0mm and 9.5mm increments. 125mm (L) x 25mm (W) x 9.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: MAGNESIUM. NOTE: For special alloy request by mail.

FIVE STEP (7.5mm – 9.5mm) WEDGE BLOCK (METRIC VERSION) NICKEL Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 7.5mm – 9.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 7.5mm to 9.5mm in 7.5mm, 8.0mm, 8.5mm, 9.0mm and 9.5mm increments. 125mm (L) x 25mm (W) x 9.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: NICKEL. NOTE: For special alloy request by mail.

SIX WEDGE (5mm – 20mm) BLOCK (METRIC VERSION) ASME SA517 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 5.0mm – 20.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 5.0mm to 20.0mm in 5.0mm, 7.5mm, 10.0mm, 12.5mm, 16.5mm and 20.0mm increments. 120mm (L) x 20mm (W) x 2.8mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. MATERIAL: ASME SA517. NOTE: For special alloy request by mail.