PAUT- Standard Notch Calibration Block (Inch Version) Special Alloy The PAUT- Standard Notch Calibration Block has been specially designed for use with Phased Array instruments used for sizing of OD and ID-connected cracks. Geometry: The block contains four EDM slots at depths of 20, 40, 60, and 80% and a width of .031". Standard thickness is 1.000". Dimensions: 1.000" thick x 2.000" wide x 7.00" long. Material: Special Alloy

PAUT- Standard Notch Calibration Block (Inch Version) 1018 Steel The PAUT- Standard Notch Calibration Block has been specially designed for use with Phased Array instruments used for sizing of OD and ID-connected cracks. Geometry: The block contains four EDM slots at depths of 20, 40, 60, and 80% and a width of .031". Standard thickness is 1.000". Dimensions: 1.000" thick x 2.000" wide x 7.00" long. Material: 1018 Steel

PAUT- Standard Notch Calibration Block (Inch Version) STAINLESS STEEL 304 The PAUT- Standard Notch Calibration Block has been specially designed for use with Phased Array instruments used for sizing of OD and ID-connected cracks. Geometry: The block contains four EDM slots at depths of 20, 40, 60, and 80% and a width of .031". Standard thickness is 1.000". Dimensions: 1.000" thick x 2.000" wide x 7.00" long. Material: STAINLESS STEEL 304

PAUT- Standard Notch Calibration Block (Inch) STAINLESS STEEL 316 The PAUT- Standard Notch Calibration Block has been specially designed for use with Phased Array instruments used for sizing of OD and ID-connected cracks. Geometry: The block contains four EDM slots at depths of 20, 40, 60, and 80% and a width of .031". Standard thickness is 1.000". Dimensions: 1.000" thick x 2.000" wide x 7.00" long. Material: STAINLESS STEEL 316

PAUT- Standard Notch Calibration Block (Inch Version) TITANIUM The PAUT- Standard Notch Calibration Block has been specially designed for use with Phased Array instruments used for sizing of OD and ID-connected cracks. Geometry: The block contains four EDM slots at depths of 20, 40, 60, and 80% and a width of .031". Standard thickness is 1.000". Dimensions: 1.000" thick x 2.000" wide x 7.00" long. Material: TITANIUM

PAUT- Standard Notch Calibration Block (Inch Version) ALUMINUM 7075-T6 The PAUT- Standard Notch Calibration Block has been specially designed for use with Phased Array instruments used for sizing of OD and ID-connected cracks. Geometry: The block contains four EDM slots at depths of 20, 40, 60, and 80% and a width of .031". Standard thickness is 1.000". Dimensions: 1.000" thick x 2.000" wide x 7.00" long. Material: ALUMINUM 7075-T6

PAUT- Standard Notch Calibration Block (Inch Version) INCONEL 625 The PAUT- Standard Notch Calibration Block has been specially designed for use with Phased Array instruments used for sizing of OD and ID-connected cracks. Geometry: The block contains four EDM slots at depths of 20, 40, 60, and 80% and a width of .031". Standard thickness is 1.000". Dimensions: 1.000" thick x 2.000" wide x 7.00" long. Material: INCONEL 625

PAUT- Standard Notch Calibration Block (Inch Version) MONAL 800 The PAUT- Standard Notch Calibration Block has been specially designed for use with Phased Array instruments used for sizing of OD and ID-connected cracks. Geometry: The block contains four EDM slots at depths of 20, 40, 60, and 80% and a width of .031". Standard thickness is 1.000". Dimensions: 1.000" thick x 2.000" wide x 7.00" long. Material: MONAL 800