ASME N-625 Reference Plate (Metric Version) Special Alloy
In accordance with ASME 1275N Boiler and Pressure Vessel Code, Section III, Nuclear Vessels.
Used for longitudinal, shear, and surface wave sensitivity calibrations.
Geometry: Contains six flat-bottom holes: three 1.6mm diameters, one each at depths of 1.2mm, 6.35mm, and 12.5mm; one 1.6mm diameter at 38mm deep; one 3.2mm diameter at 41.3 deep; and one 6.35mm diameter at 44.5 deep. Also contains the calibration notch.
Dimensions: 300mm (L) x 150mm (W) x 12.5mm (T).
Material: Special Alloy
Note: For special alloy request by mail.